Trending March 2024 # Another Android 4.0.3 Firmware For Galaxy Note — Dxlp9 # Suggested April 2024 # Top 3 Popular

You are reading the article Another Android 4.0.3 Firmware For Galaxy Note — Dxlp9 updated in March 2024 on the website Moimoishop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Another Android 4.0.3 Firmware For Galaxy Note — Dxlp9

A new Ice Cream Sandwich Android 4.0.3 firmware for the Galaxy Note — DXLP9 — is rolling out officially. Ice Cream Sandwich for the Galaxy Note brings a premium suite of applications specifically designed for use with the S-Pen, along with general Android 4.0 updates like faster performance, Face Unlock, improved data usage management, and more.

DXLP9 is a firmware for Asian countries like Thailand, Malaysia, Indonesia and Vietnam, but will work on any Galaxy Note out there regardless of country. Being the latest firmware to be released, you should definitely try it out.

Let’s look at the procedure to install the DXLP9 firmware on the Galaxy Note.

Compatibility

This firmware and the guide below are compatible only and only with Galaxy Note, model number N7000. It’s not compatible with any other device. Check your device’s model number in: Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How to Install DXLP9 Android 4.0 Firmware on Galaxy Note

Warning! The recent Ice Cream Sandwich firmware, XXLPY, for the Galaxy Note N7000 had a serious bug. From what we can gather, the bug bricks the phone when you wipe data — that is, do a factory reset — in recovery, or flash a ROM or something in recovery after flashing the firmware. So, DO NOT use RECOVERY at all. Even transferring a large file may brick the phone, because it’s related to eMMC (sdcard). It’s said that the bug hasn’t affected all phones, and the brick rate might be 5%, which is actually pretty damn high for bug that can completely destroy the phone, we don’t even know whether Samsung service center guys would be able to fully repair it, although we think they should be able to.

Read more about the bug here.

——————Installation Guide below, but do Read the Warning text above first————–—

Important! Don’t forget to at least make a backup of your APN settings, which you can restore later if your data connection does not work after installing the ROM. Use the backup guide to find out how.

Extract the downloaded zip file once to get the following files (you might see the file name end with .tar instead of .md5 as the file extension is usually hidden, so it’s normal):

N7000DXLP9_N7000OLBLP6_N7000DXLP5_HOME.tar.md5

SS_DL.dll [ignore this one]

Extract the contents of the Odin 1.85.zip file to a convenient location on your computer.

Disconnect your phone if it’s connected to PC, then switch it off.

In recovery, use the Volume buttons to navigate and the home/power button to select.

Select wipe data/factory reset, then select Yes on next screen to confirm. Wait a while till the data wipe is complete.

After the data wipe is complete, remove the battery of the phone, then re-insert it. Keep the phone off, and go to the next step.

Now, put the Galaxy Note in Download Mode — press and hold these keys together: Volume Down + Home + Power. A Warning! screen will come up; press Volume Up key to continue to enter Download Mode.

Important! Do not make any other changes in Odin except selecting the required file as given in step 13. Leave all other options as they are.

If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed (check step 2). Also, uninstall Kies from the Control Panel as well (this will leave the drivers on the computer but remove Kies which can interfere with the procedure).

IMPORTANT Note: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 9.

If you run into any roadblocks while flashing the firmware, let us know and we’ll help you out.

You're reading Another Android 4.0.3 Firmware For Galaxy Note — Dxlp9

Update Galaxy S2 With Leaked Xxkpa Android 4.0 Firmware

It’s here. Another unofficial Ice Cream Sandwich update for the Samsung Galaxy S II I9100. This time it’s XXKPA, a successor firmware to XXKP8 we covered a few days ago.

We know you are anxiously waiting for the official release of Ice Cream Sandwich, but until then, these leaked firmware are here to satisfy your hunger for tasting Ice Cream Sandwich on your Galaxy S II. So, read on to find out how to flash it on your phone.

Although XXKPA doesn’t differ much from the previous leak, XXKP8, it’s still said to run faster and overall better in terms of touchscreen response and feel. So, we can say, it’s the best Ice Cream Sandwich leak for Galaxy S2 so far.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to you or your device, we won’t be held liable — you only will be responsible, you’ve been warned!!!

Compatibility

This rom and the guide below is compatible only and only with Galaxy S2, model number i9100. It’s not compatible with any other device. Check your device’s model number in:Settings » About phone.

Pre-Installation tips:

If you have Samsung’s PC software Kies installed, un-install it first because it may interrupt the flashing process.

Install XXKPA Firmware on Galaxy S2 to get Android 4.0 ICS

Extract the downloaded file ‘I9100XXKPA_I9100OXAKPA.rar’ of XXKPA firmware to get these 7 files (the file-names may end with .tar instead of md5 as the file extension is hidden, so don’t worry):

GT-I9100-MULTI-CSC-OXAKPA.tar.md5

I9100_CODE_I9100XXKPA_CL51925_REV02_user_low_ship.tar.md5

I9100_EFS_I9100XXKP9_CL45181_REV02_user_low_ship.tar.md5 [not to be used]

I9100_KERNEL_I9100XXKP9_CL45181_REV02_eng_mid_ship.tar.md5 [not to be used]

MODEM_I9100XXKPA_REV_02_CL1094591.tar.md5

u1_02_20110310_emmc_EXT4.pit

Disconnect your phone if it’s connected to PC.  Switch Off your phone. Wait for vibration to confirm complete switch off.

Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume Down + Home + Power. You’ll get an options screen. Press Volume Up now to go to download mode (which is also called Odin mode). This is required to install the XXKPA (or any other firmware) using Odin PC Software.

Connect your phone to PC now. You should get the message “Added! !” under the Odin’s message box in the bottom left. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed. See point 3 above under ‘pre-installation tips’.

Select these files in Odin at respective tabs:

Important! On Odin, make sure Re-Partition, Auto Reboot and F. Reset Time check boxes are selected. Do not touch any other check box or tab or anything, except as was required in step 8 above.

Double check everything said in step 7 and 8 above. [And, do not use the files in step 2.3 and 2.4 anywhere in Odin]. This is my Odin’s screen while I flashed the XXKPA on my Galaxy S2 — your Odin’s window should look real similar to this:  

Now, hit the START button to start flashing of XXKPA Android 4.0 firmware on your Galaxy S2. When the XXKPA Android 4.0 firmware has been installed by Odin on your phone, your phone will automatically reboot — and when you see the Samsung logo, you can safely unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. In case it says FAILS (with red background) or nothing seems to be happening, check the Important Note below after step 11 to know what to do.

When it has restarted, your Galaxy S2 will be running Ice Cream Sandwich (ICS) with version being Android 4.0.3, build being XXKPA and Samsung’s custom UI TouchWiz 4 atop it. Check out your Galaxy S2’s android version here: Settings » About Phone.

IMPORTANT NOTE: If Odin doesn’t seem to be progressing/doing anything for more than a minute, or fails to complete the process, do the following:

Disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 5.

(Optional, of course) If you found this guide useful, share it with others too on webpages, forums, your Facebook/twitter/Google+ pages, etc. That would be helping us grow too!

Get Galaxy S3 Android 4.3 Update Now With Firmware I9300Xxugmj9

After the leaks and official updates on Galaxy S4 (I9500 and I9505) and S3 (I9300), the Android 4.3 Update by Samsung for the Galaxy S3, model no. GT-I9300, has become available — I9300XXUGMJ9 is the build no.

This is leak firmware. And only a test build. it’s working good but not perfect — there may be (read: are) bugs present which should be fixed by Samsung upon final official update, which may happen in coming weeks. that said, it’s been under testing for some time now, and is said to be working all nice.

So, if you can wait for few weeks for Samsung to release the full and final official Android 4.3 Jelly Bean update for the Galaxy S3, you may wait. but if you can’t wait, just keep reading on as we see a detailed step-by-step guide on how to download and flash the I9300XXUGMJ9 Android 4.3 Update on the Galaxy S3.

And FYI, Samsung never brought the Android 4.2 version to Galaxy S3, to it’s one first of its kind huge update for the Galaxy S3 users, whose device came pre-installed with Android 4.1, never saw Android 4.2, and is in the front line to get Android 4.3.

About the KNOX on Galaxy S3

KNOX, in plain words is, bad. It will void your warranty upon detecting a not-Samsung-approved change to core files of you phones, which is exactly what is done while rooting a device. So, KNOX hates root, and thus, we hate KNOX.

Because, rooting on a phone with KNOX installed, voids the warranty of the device. Upon first boot after root, KNOX gets triggered on reading the unauthorized code and marks warranty as 0x1, which means void. And, Warranty 0x0 is what is by default and also what you want.

Now, KNOX isn’t present in this text build of Android 4.3 update for the Galaxy S3, which is great — you have one good Android 4.3 based firmware from Samsung without KNOX! But, we fully expect Samsung to mix KNOX in final builds of Android 4.3 for the Galaxy S3.

That said and learned, let’s see how to install Android 4.3 on Galaxy S3 using the leaked firmware, I9300XXUGMJ9.

Warranty may be void of your device if you follow the procedures given on this page!

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-I9300!

Please know that this page is meant only for Samsung Galaxy S3 international variant, model no. GT-I9300!. Please DO NOT try the procedures given here on other variants of the Galaxy S3, including those S3 sets at AT&T, Verizon, T-Mobile, Sprint and other variants who have different model no.

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install this KNOX-free Android 4.3 update on your Galaxy S3 GT-I9300 in order to avoid any complications later, and have a smooth and successful process.

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on sd card, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

INSTALL GALAXY S3 DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash KNOX-free Android 4.3 firmware international Samsung Galaxy S3 GT-I9300. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy S3 on your computer.

► SAMSUNG GALAXY S3 DRIVER INSTALLATION GUIDE

CHARGE YOUR DEVICES

If your android device, or PC, powers off due to lack of battery while the process is underway, it could damage the device. So, make sure both of them are adequately charged and that no power interruption takes place when the process is undergoing — at least 50% battery of the device and laptop is what we would recommend.

OTHER THINGS TO TAKE CARE OF:

└ Use original USB cable to connect your phone to PC.

└ Do not use the procedures given below on Mac (using VMWare) as it works best on proper Windows PC only.

EXAMPLE VIDEO

If you haven’t used Odin software to install a firmware on your device before, we suggest you first watch a video of that, given right below, to get familiar with the process.

Btw, the video below features installation of TWRP recovery on Galaxy S3 using odin. But as the process is exactly same, it doesn’t matter.

NOTE: Keep in mind that the following procedure will flash just a KNOX-disabled firmware. And it is NOT rooted.

Make sure you’ve backed up you’re device before proceeding.

DOWNLOADS

Download the files given below and save them in a separate folder on your computer (just to keep things tidy, that is).

STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after installing the firmware, which might delete internal sd card too, your files will remain safe on PC.

Extract/Unzip the chúng tôi file on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe

Extract/Unzip I9300XXUGMJ9_I9300VFGGMJ5_I9300BUUGMJ3_VFG.zip file on your computer now to get these files:

AP_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5

Add BL_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5

Add MODEM_I9300BUUGMJ3_REV02_REV04_CL1413323.tar.md5

Add CSC_VFG_I9300VFGGMJ5_1986192_REV00_user_low_ship.tar.md5

Disconnect the Galaxy S3 from PC if it is connected.

Boot your Galaxy S3 GT-I9300 into Download Mode (the image below of the Galaxy Note 2 would help):

Power off your phone first and wait for 6-7 seconds after display is off.

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.

Also, try another USB port on your PC and make sure you use good quality cable, preferably that came with the phone. Reboot phone and PC and try again

.

Load the file sinto Odin now:

If you see FAIL message instead of the PASS in Odin’s top left box, that a problem. Try this now: disconnect your S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Congratulations! You have successfully flashed the KNOX-disabled firmware on your S3.

Feedback Us!

It was easy, right? Let us know what you plan to do now, with root access gained.

Suggestions are most welcomed!

Download Galaxy A5 Active Firmware

Samsung Galaxy A5 Active Firmware

Galaxy A5 Active Firmware (SM-G870A, AT&T)

Galaxy A5 Active Firmware (SM-G870F)

Galaxy A5 Active Firmware (SM-G870W, Canada)

How to download correct firmware file

This is the important part!

Be sure to check and find the correct the model no. of your Galaxy A5 Active. Then based on your device’s model no., look for the appropriate firmware build from above.

Now that you know the model no., download the latest firmware from above for that model no. exactly.

Next, install the firmware on your Galaxy A5 Active by following the guide linked right below.

How to Install Firmware

First, read our disclaimer, then take backup and then follow the guide below to install the firmware.

Disclaimer: Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and thus you need to be cautious of it. In any case, you only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Backup, backup, backup! Create an appropriate backup of contacts, pictures, videos, songs and other important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have a backup of all your important files. Sometimes, firmware installation may delete everything on your device! Like, when you change the CSC of your device, knowingly or not.

Step-by-step Firmware Installation Guide

Let’s see how to install the firmware on your Galaxy A5 Active. Make sure you have more than 30% battery on your device.

Step 1. Make sure you have downloaded the correct firmware file on your PC. See above for how to download correct firmware file for your Galaxy A5 Active and download links.

Step 3. Also, download Odin PC software (latest version).

Step 5. Extract the Odin file. You should get the Odin exe file (other files could be hidden, hence not visible).

Step 6. Disconnect your Galaxy A5 Active from PC if it is connected.

Step 7. Boot into download mode:

Power off your device. Wait for 6-7 seconds after screen goes off.

Press and hold the three buttons Volume down + Home + Power together until you see Warning screen.

Press Volume Up to continue to download mode.

Step 9. Connect your device now using USB cable. Odin should recognize your device. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.

You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.

If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem (look at step 2 above).

You can try different USB ports on your PC too.

Load the firmware files(s) on your device. This depends on how many files you got in step 4 above upon extracting the firmware .zip file.

Case 1: If you got a single .tar/.tar.md5 file, then load this into AP tab of your Odin software. Then go to next step.

Case 2: If you got more than one .tar/.tar.md5 file, then you must be having files starting with AP, CSC, Home_CSC, BL, CP, etc. stuff. In this case, choose the files as following. Select the firmware files as follows.

About CSC file: Using the HOME_CSC file won’t reset your device, and data on the phone shouldn’t be deleted. However, when we select regular CSC file, and it results in CSC on device being different than that in CSC file, your phone will be formatted automatically. You can even choose to ignore loading the CSC file, that may do alright too. But if it doesn’t works out, repeat the whole process and select CSC file this time around.

Info: When you load files, Odin checks the md5 of firmware file, which takes time. So, simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size will also show up in Odin.

Go back to Log tab now, as it will show the progress of firmware installation when you hit start button in next step.

Wait till installation is finished, after which your device will reboot automatically. You’ll get PASS message as shown below upon successful installation from Odin.

Some errors you may run into, and with respective solution.

If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the file and flash it again as said above.

If you get FAIL in the top left box, then also you need to flash the file again as stated just above.

That’s it. Let device restart automatically.

Firmware Benefits

You can use the firmware for variety of purposes, which includes:

Fix your Galaxy A5 Active if it’s giving you force closes errors and restarts randomly.

Unbrick your Galaxy A5 Active if it’s bootlooping and stuck at logo when restarting.

Go Back to Stock on your Galaxy A5 Active — helps when looking to sell the device, or fix installing OTA updates if broken.

Restore Galaxy A5 Active to factory state.

Upgrade your Galaxy A5 Active to newer Android version.

Downgrade your Galaxy A5 Active to lower build no. at same Android version.

Unroot your Galaxy A5 Active.

Remove custom recovery like TWRP and CWM, if installed, on your Galaxy A5 Active.

N900Vvrucnc4: Verizon Galaxy Note 3 Android 4.4.2 Kitkat Finally Arrives

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  FLASH FIRMWARES ON SAMSUNG DEVICES USING ODIN

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 1: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Samsung device.

In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.

► SAMSUNG GALAXY NOTE 3 DRIVERS INSTALLATION GUIDE

   STEP 2: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.

  ODIN ZIP FILE  

icon-file-o

 FIRMWARE ZIP FILE   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might delete internal sd card too, your files will remain safe on PC.

Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe

Extract/Unzip the Firmware zip file, N900VVRUCNC4_N900VVZWCNC4_VZW.zip on your computer (using 7-zip free software, preferably) to get this file: N900VVRUCNC4_N900VVZWCNC4_

N900VVRUCNC4

_HOME.tar.md5

Move the friwmare file, tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:

Odin3 v3.09.exe

N900VVRUCNC4_N900VVZWCNC4_

N900VVRUCNC4

_HOME.tar.md5

Disconnect the Galaxy Note 3 from PC if it is connected.

Boot your Samsung Galaxy Note 3 into Download Mode:

Power off your phone first and wait for 6-7 seconds after display is off

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home

For further help on download mode, check our post on How to Boot into Galaxy Note 3 Download Mode.

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy Note 3 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again.

Load the firmware file (extracted in Step 1) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Latest Twrp Recovery For Galaxy Note 3 Sm

You’ll be happy to know that the latest Exynos processor powered Galaxy Note 3 has recently received the latest version of TWRP Recovery. The latest version not only brings new features but also promises to be void of the recovery in-compatibility issue with KitKat ROMs, which was due to ‘set metadata recursive’ error.

Yes, now all Android 4.4 ROMs like CyanogenMod 11, OmniRom, SlimKat, etc will work just fine without returning the troubling ‘set metadata recursive’ error.

At the time of posting, the latest version of TWRP Recovery, for SM-N9000 variant of Galaxy Note 3, is 2.6.3.7.

WARNING!

Warranty may be void of your device if you follow the procedures given on this page!

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N900 or SM-N9000!

Please know that this page is meant only for Samsung Galaxy Note 3, model no. SM-N900 or SM-N9000. Please DO NOT try the procedures given here on other variants of the Galaxy Note 3: SM-N9005/SM-N900W8, or the Note 3 sets at T-Mobile, Sprint, and others who have different model no.

BEFORE YOU BEGIN..

You must do this pre-installation stuff before attempting to install TWRP Recovery on your International (Exynos) Galaxy Note 3 in order to avoid any complications later, and have a smooth and successful process.

BACK UP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on sd card, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

INSTALL GALAXY NOTE 3 DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash TWRP Recovery on your Samsung Galaxy Note 3. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Note 3 on your computer.

► SAMSUNG GALAXY NOTE 3 DRIVERS INSTALLATION GUIDE

CHARGE YOUR DEVICES

If your android device, or PC, powers off due to lack of battery while the process is underway, it could damage the device.

So, make sure both of them are adequately charged and that no power interruption takes place when the process is undergoing — at least 50% battery of the device and laptop is what we would recommend.

OTHER THINGS TO TAKE CARE OF:

└ Use original USB cable to connect your phone to PC.

└ Do not use the procedures given below on Mac (using VMWare) as it works best on proper Windows PC only.

EXAMPLE VIDEO

If you haven’t used Odin software to install a recovery on a Samsung galaxy device before, we suggest you first watch a video of that, given right below, to get familiar with the process.

Btw, the video below shows installing the the CWM recovery on Samsung Galaxy S3 (not Note 3), but as the process is exactly same, it doesn’t matter.

GUIDE: SAMSUNG GALAXY NOTE 3 TWRP RECOVERY

DOWNLOADS

Download the file given below and save them in a separate folder on your computer (just to keep things tidy, that is).

File name: samsung-galaxy-note-3-smn9000-twrp-odin.zip (9.1 MB)

STEP-BY-STEP GUIDE

Extract/Unzip the TWRP Recovery file, samsung-galaxy-note-3-smn9000-twrp-odin.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:

Odin3 v3.09.exe

Odin3.ini

openrecovery-twrp-2.6.3.7-ha3g.img.tar

Disconnect the Galaxy Note 3 from PC if it is connected.

Power off your phone first and wait for 6-7 seconds after display is off.

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.

If you don’t get the Added! message, here are some 

troubleshooting tips

:

Make sure you have installed driver for Galaxy Note 3 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again.

Load the recovery file (extracted in Step 1) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps.

If you see FAIL message instead of the RESET in Odin’s top left box, that a problem. Try this now: disconnect your Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

FEEDBACK US!

It was easy, right? Let us know what you plan to do now, with latest TWRP Recovery installed. Looking to install Android 4.4 KitKat maybe, eh?

Suggestions are most welcomed!

Update the detailed information about Another Android 4.0.3 Firmware For Galaxy Note — Dxlp9 on the Moimoishop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!