Trending November 2023 # Audacity Error Opening Recording Device, Error 9999 Unanticipated Host Error # Suggested December 2023 # Top 14 Popular

You are reading the article Audacity Error Opening Recording Device, Error 9999 Unanticipated Host Error updated in November 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Audacity Error Opening Recording Device, Error 9999 Unanticipated Host Error

Audacity is a popular and free-to-use digital audio editor and recording application. But while using it on Windows PC, users have reported coming across Audacity Error opening recording device, 9999 Unanticipated host error. If you face this issue, then this post will help you.

The problem occurs while trying to record something on Windows PC. Thankfully, like any other issue, it can be eliminated as well with some simple fixes. Let’s check them out one-by-one.

What causes Audacity Error code 9999 Unanticipated host error?

Audacity throws Error code 9999 Unanticipated host error while trying to record something on the application. There are multiple reasons behind the culprit. Some of the most common ones are listed below.

The problem in the question will occur if Audacity is not allowed to access the Microphone.

If any other audio recording application is running in your system’s background, you will most likely face the problem.

Different third-party anti-virus programs can interfere with the smooth functioning of Audacity and cause problems.

Now that you have prior knowledge of different reasons causing the issue let’s check out how to fix them.

Audacity Error code 9999 Unanticipated host error

Here are all the effective solutions to try to get rid of Audacity Error code 9999 Unanticipated host error.

Restart the application

Allow the application to access Microphone

Close similar applications

Set the Microphone as the default device

Disable third-party antivirus software

Troubleshoot in Clean Boot

Now, let’s check out all these fixes in detail.

1] Restart the application

Before trying any of the below technical solutions, the first step you should take is to restart the application. As it turns out, for most users, the problem resulted from a temporary glitch and was fixed upon restarting the application. So, restart Audacity and check if it fixes the problem. If yes, you are good to go. But in case the problem continues, try the next solution on the list.

See: Fix Audacity FFmpeg error on Windows PC

2] Allow the application to access Microphone

As mentioned, one of the primary reasons behind the problem in question is that you haven’t allowed Audacity to access the system microphone. You will have to allow Audacity to access the Microphone to fix the problem. Below are the steps you need to follow to fix the problem.

Open Settings by pressing Windows + I shortcut key.

In the following window, enable the toggle present next to Microphone access.

That’s it. Now reboot your Windows PC and launch Audacity. Check if you are still encountering the error message while trying to record.

See: Fix Audacity FFmpeg error on Windows PC

3] Close similar applications

Another primary reason behind the problem is the similar running applications in the background. As it turns out, different applications with Audacity-like functionalities running in the background can cause the issue in question. You will have to close all such applications to fix the problem.

4] Set the Microphone as the default device

The next solution on the list is to set the Microphone as the default device. Below are the steps to do it.

Open Settings.

Switch to the Recording tab.

Select the Microphone.

Launch the application and check if the problem is solved.

5] Disable third-party antivirus software

Different third-party anti-virus programs can interfere with the smooth functioning of Audacity and cause the problem in question. As a solution, disable any such application installed on your system and check if it solves the problem. If yes, then you know what is causing the issue. From the next time, temporarily disable such application before running Audacity.

Read: How to split and merge Audio files using Audacity in Windows

6] Troubleshoot in Clean Boot

If none of the steps were helpful, you could consider troubleshooting in clean boot. The system boots up with a pre-selected minimal set of drivers and startup programs in the clean boot state. So, troubleshoot in Clean Boot and check if it fixes the problem.

How do I fix unanticipated host on Audacity?

Read Next: Reduce or Remove Background Noise using Audacity for Windows PC

You're reading Audacity Error Opening Recording Device, Error 9999 Unanticipated Host Error

Fix Dxgi Error Device Hung In Apex Legends

Fix DXGI Error Device Hung in Apex Legends [7 Expert Tips] Quickly fix the 0x887a0006 DXGI_ERROR_DEVICE_HUNG Apex Legends




You can fix the 0x887a0006 Dxgi error device hung in Apex Legends problem by running the game with admin privileges and updating your GPU driver. 

The error means that the outdated graphics card cannot process what is being displayed by the game, so it crashes.

A missing key in the Registry editor, GPU overclock, and corrupted or missing files can also cause the game to crash.



Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

Apex Legends have been hit by a mysterious bug and many gamers are complaining that Apex Legends crashes out at the logo screen.

If you’re having issues with the game and getting a 0x887a0006 DXGI error device hung Apex Legends error code, this guide should be helpful.

Game crashes are the most annoying thing that can happen to you, especially when you’re trying to reach a new level or constantly investing in new characters.


According to Microsoft, the DXGI ERROR DEVICE HUNG error is a problem with command transmission between the system hardware and games.

When it happens repeatedly, this error might be very problematic for certain Windows games. However, with the right solutions, you can get rid of it.

What causes DXGI hung?

Apex Legends error message 0x887a0006 could be caused by several different factors, some of which are listed below:

Admin Privileges: Administrative privileges are required to keep the game running smoothly. The game might crash or trigger errors if it does not have the required permission.

Outdated Drivers: Some games are not compatible with older graphics cards, which can cause the game to crash. To fix this, you just need to update your Windows 11 drivers.

Missing Files: If any of the game’s files are missing or corrupted, the game will not load correctly.

Registry missing key: Some users have reported this error because of a missing key in the Windows Registry that helps to load the game’s graphics. If the key is missing, the game may not load and can result in crashes.

GPU overclocking: Several people pointed out that this might have been due to GPU overclocking.

How do I fix the Apex error 0x887a0006? 1. Run Apex Legends with Administrative privileges

The game needs administrative privileges to function properly. If these permissions are not granted, you can perform it manually as in the example below.

1. Press the Windows key and type Apex Legends into the Search bar.

4. Select Properties to switch over to the Compatibility tab.

2. Revert to the stock frequency

If you overclock the graphics card by increasing its frequency to a number higher than it was set at by the manufacturer, several issues might arise.

The developers of the game may be limiting the card’s frequency because they know this can increase the card’s temperature and even result in instability.

Expert tip:

Applying these changes can help you get rid of the issue.

Updating your Windows can help fix multiples issue including the 0x887a0006 dxgi_error_device_hung Apex Legends error. In case the issue persists, move on to the next method.

4. Repair missing or corrupted files

Game files can sometimes go missing or become corrupted over time. When this happens, the game might crash. Therefore, applying this method might help in fixing the issue.

If you want to update and install your graphics card drivers more easily and fully automated, you have specialized software created for this task.

Using Outbyte Driver Updater, you will start by scanning the entire system and detecting outdated or missing drivers. Then, just select the device driver you need to update or choose all the outdated drivers at once.

⇒ Get Outbyte Driver Updater

6. Add a new key in the Registry Editor

The error can also be caused due to missing registry key. Thus, adding a new key can help fix the problem.

7. Rollback the Graphics driver

Sometimes the current Graphics driver isn’t compatible with your device and this can result in issues like random crashes.

Therefore, you might be able to get rid of the annoying error by simply rolling back the driver.

Is Apex Legends free to play?

Many players want to know if Apex Legends is free to play. The game was released in early November 2023 and has attracted millions of players worldwide, making it one of the best PC games of all time.

However, while Apex Legends is free to download, some in-game purchases can add up quickly. Some users have also complained that Apex Legends won’t launch on their PC.

Don’t worry though, we have you covered on all these issues, and you can find them in our common Apex Legends bugs guide.

Furthermore, you may also want to check our guide on the best VPNs for Apex Legends to reduce pin and lag

Still experiencing troubles? Fix them with this tool:


Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?


Start a conversation

Directx Setup Error: An Internal Error Has Occurred – Origin

Origin makes use of the DirectX API like all other game engines. DirectX is used in graphics and the rendering done inside the game. If when you try to install or launch games in Origin on Windows 10, you encounter the DirectX Setup Error: An internal error has occurred error message, then this post might interest you. In this post, we will identify some potential known causes that can trigger the error and then provide the possible solutions you can try to help remediate this issue.

This error occurs when Origin is unable to launch the DirectX setup when installing or launching your game for the first time. You might encounter the DirectX Setup Error: An internal error has occurred error message due to one or more (but not limited to) of the following known causes;

Outdated or corrupt DirectX files.

In some cases, Origin is unable to independently install DirectX on your computer. This might be because of permission issues or because the elevation is not granted.

Antivirus software conflict.

DirectX Setup Error: An internal error has occurred

If you’re faced with this DirectX Setup Error, An internal error has occurred issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

Delete or move old DirectX files to another folder

Manually install DirectX

Temporarily disable the antivirus program

Reinstall Origin.

Let’s take a look at the description of the process involved in relation to each of the listed solutions.

Before you proceed with the solutions, make sure that you are logged in as an administrator on your computer and make sure you have an open internet connection without any proxy servers or VPNs.

1] Delete or move old DirectX files to another folder

If the DirectX files already present in your directory are corrupt or unusable, you’ll encounter the DirectX Setup Error: An internal error has occurred issue. This can occur if you have changed the directory of Origin folder, which invalidates the original file paths. In this case, you can delete the old file or move them to another folder and then launch Origin – when Origin detects the missing files, it will download and install them again accordingly.

Do the following:

Press Windows key + E to launch File Explorer.

Navigate to the following directory:

C:Program Files (x86)Origin Games*name of game*Installerdirectxredist

If you don’t see the redist folder, you’ll need to show hidden files and folders. Here’s how:

Launch File Explorer.

Select the View tab.

Also, uncheck the Hide protected operating system files (Recommended) option.

Now you need to create a new sub-folder within the redist folder and name it anything you want, then move all the files into the new folder except the ones mentioned below:




Once you have moved the files, you can exit File Explorer and launch Origin then launch the game and see if the issue is resolved. If not, try the next solution.

2] Manually install DirectX

In some cases Origin will fail to install DirectX on its own which can trigger the DirectX Setup Error: An internal error has occurred issue. This can be traced back to Windows Updates where the security settings are made tighter and access to applications gets limited.

This solution requires you manually download and install DirectX and see if that helps to resolve the issue.

3] Temporarily disable the antivirus program

If you have recently installed any third-party antivirus software on your computer, there are chances that it is interfering with Origin when it tries to install DirectX files which can cause the DirectX Setup Error: An internal error has occurred issue. In this case, you can try to first disable your antivirus software temporarily. If disabling the AV program doesn’t work, then completely uninstall the AV program and see if that helps.

4] Reinstall Origin

Origin is a digital distribution platform developed by Electronic Arts for purchasing and playing video games. The platform’s software client is available for personal computers and mobile platforms. The Origin client is self-updating software that allows users to download games, expansion packs, content booster packs and patches from Electronic Arts. It shows the status of components available.

You are basically using Origin to launch your games. In this solution, you can try to uninstall Origin client via the Programs and Features applet and then head to the official website and download and install the client again and see if this fixes the DirectX Setup Error: An internal error has occurred issue.

Note: You will have to re-download all of your games from scratch after you reinstall Origin.

You can also try repairing the entire game from within the client. This helps pinpoint files that are incomplete or corrupt.

PS: This post will help you if you receive DirectX failed to initialize error message.

Hopefully one of these solutions will work for you!

Fix: A Required Cd/Dvd Drive Device Driver Is Missing Error

Fix: A Required CD/DVD Drive Device Driver is Missing Error Get past this error so you can properly install Windows 7




You may think the reason a CD/DVD driver error appears is that people are using outdated technology to upgrade their Windows 7 computer.

But this can actually happen if you use a USB driver as well and it’s just as annoying.

This guide will show you how to get around this driver error from pre-installation to post.



Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

The CD/DVD Device Driver error occurs when you’re trying to install Windows 7 or upgrade it to another OS through either a DVD or USB device. This is only one error that can occur with upgrading the OS.

Updating to Windows 10, for example, has its own set of challenges. But the trickiness of the CD/DVD error warrants its own solutions, such as going into BIOS.

What is causing the device driver missing error?

According to Microsoft, there are three leading causes behind the driver error. We’re going to a couple more on top of that, so all bases are covered.

CD/DVD Drive may not compatible with Windows 7: It may be hard to believe people still use drivers, but with Windows 7, it’s possible. You’ll have to replace the drive in this instance.

The drive may not work with the Microsoft AHCHI driver: To fix this, you’ll have to go into BIOS on Windows 7.

The physical disk used for installing Windows 7 is dirty: The solution for this is pretty easy. Just clean it and insert it back.

USB flash drives are prone to this error: We recommend using a different USB drive to install the operating system if the first one doesn’t work.

The USB 3.0 port doesn’t recognize the drive: This is actually a fairly common error. We recommend reinstalling the USB 3.0 drivers to fix this.

How do I address the missing driver error?

Solutions for this error can range from incredibly easy to pretty tricky, as you’ll have to go into your computer’s BIOS.

Plug the USB drive that has Windows 7 into another port. Doing this solves the problem a majority of the time.

Conversely, unplug the drive and plug it back into the same drive. It’s that simple.

If there is one, update your computer’s drivers to the latest version. Unfortunately, Windows 7 is no longer officially supported, so this may be tricky.

And if all else fails, contact your computer’s manufacturer for support.

1. Disable AHCI Mode

Press the F2 key on your keyboard. If you have to enter BIOS, restart your computer and try again.

Using the arrow keys, move to the Advanced tab and find the Local Bus IDE adapter.

Highlight it, press Enter on your keyboard, and set the adapter to Primary in the new window.

Press F10 on your keyboard to exit and return to the installation wizard.

AHCI stands for Advanced Host Controller Interface and can get in the way of installing Windows 7.

2. Reinstall USB 3.0 drivers

As an automated alternative to the manual procedure, you can try using a dedicated tool, such as Outbyte Driver Updater. This program scans your device for all outdated drivers and automatically updates them with brand-new versions from its repository.

Prevent various errors from appearing on your computer and maintain your drivers updated with Outbyte Driver Updater.

Free Trial Download now

3. Adjust Registry Editor Are there other fixes for Windows 7 that I should know about?

A particular Bluetooth driver called BCM20702A0 had been reported missing, causing specific hardware components to malfunction. We strongly recommend getting this fixed.

Fortunately, it’s easy to do. All you have to do is go to the manufacturer’s website and download it from there. You should also look into getting a register cleaner to boost your computer’s performance.

And the best part is it’s done automatically. Some of our favorites include Fortect, CCleaner, and Iolo System Mechanic.

Still experiencing troubles? Fix them with this tool:


Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?


Start a conversation

How To Fix Error Connection Closed Error In Google Chrome? – Webnots

Google Chrome shows different type of browser errors when connecting to internet. One of the popular errors is connection closed error that you will see in the browser as “Err_Connection_Closed”. This generally occurs in Chrome when there are invalid configurations in your network devices and mismatched server certificates may also cause this error. Fortunately, it is easy to fix the connection closed error by following simple steps explained in this article.

Connection Closed Error in Google Chrome

Chrome will show the message like below indicating the the site can’t be reached due to “Err_Connection_Closed” error. It won’t be possible for you to proceed further whenever you see this message on the browser.

Error Connection Closed in Chrome

Related: How to fix err_network_changed, err_connection_reset and err_internet_disconnected errors in Google Chrome.

How to Fix Connection Closed Error?

Check your internet connection

Check the firewall connection

Disable proxy server and VPN

Reset TCP/IP settings

Flush DNS

Clear Chrome cache

Use Google DNS

Use Chrome cleanup tool

Remove Chrome extensions

Reset Chrome settings

Update to latest version

Delete and reinstall Chrome

Let us discuss each solution in detail.

Solution 1 : Check Your Internet Connection

Often the cables of your modem or router may have loose connection and drop the internet. It is also a common problem for the Wi-Fi gets disconnected in Windows 10. So check your internet connection by using other devices like mobile phone or by opening other apps on your laptop. Once the connection is stable, just refresh the page showing “err_connection_closed” error to see it opens.

Solution 2 : Check Firewall Connection

The misconfigured firewall on your PC or Mac can result in different types of browser errors. Disable the firewall temporarily to check the webpages are opening properly. On Windows 10 you can disable the firewall under “System and Security” settings. On Mac this can be done in “Security & Privacy” option under “System Preferences” settings. Learn more on how to manage firewall settings in Windows 10 and Mac.

Solution 3 : Disable Proxy and VPN Setup

Proxies and VPN are used to bypass the network of your Internet Service Provider and access the internet anonymously. Disable proxy servers under “LAN Settings” to see if that helps.

Disable Proxy Servers in Windows 10

You can disable proxies in Mac under “Network” option under “System Preferences”.

Similar to proxies, VPN connection can also cause unexpected problems and result in connection closed error. However, VPN configuration depends on whether you have manually installed the profile or using the app. At any case disable the profile or close the app and check the page can be connected normally.

Solution 4 : Reset TCP/IP settings

Resetting the network connection can sometime help you to fix connection closed error. Press Windows key and then R to open Run dialog box. Type in “cmd” to open the command prompt.

Open Command Prompt from Run

Enter the following commands in the command prompt window and hit enter after each one.

nbtstat –r netsh int ip reset netsh winsock reset

Restart the PC after applying these changes and check whether you still encounter the error. You can also assign static IP address to check if that works.

Solution 5 : Flush DNS

Sometimes the corrupted DNS on your PC may also cause the error_connection_closed error. You can flush the DNS by opening the command prompt as explained above and use the below command in Windows PC.

ipconfig /flushdns Solution 6 : Clear Chrome Cache

Go to the Chrome URL “chrome://settings/clearBrowserData” and delete all your browsing history and cache from the beginning. This will remove all corrupted and incorrect cached files which may be preventing the page to load.

Delete History Advanced View in Chrome

Make sure to check the options Browsing history, Download history, Cookies and other site data and Cached images and files.

Solution 7 : Use Google DNS

By default Chrome will get the DNS details from your ISP and try to resolve the site address into a IP address. When your ISP or any of the upstream DNS servers are misconfigured then you will see difficulty in opening the page. The solution here is to try using Google public DNS which can help to resolve the site address to a IP address faster than using your ISP’s DNS settings.

Solution 8 : Use Chrome Cleanup Tool

Google offers an official tool that helps users to scan and remove malware like programs from the PC. These malware programs can interrupt your connection and cause “err_connection_closed” error. Install the tool on your PC and follow the instructions to scan and remove the unnecessary programs that interfere with Chrome.

Google Chrome Cleanup Tool

Solution 9 : Remove Chrome Extensions

Extensions are additional piece of software code that enhance the functionality of your Chrome browser. There are thousands of free extensions available in Chrome store. But these extensions, especially incompatible ones installed on your browser can cause problem. Go to the URL “chrome://extensions/” in address bar and disable all the installed extensions. Open the webpage again and check the problem is resolved. If the problem is resolved then you can install the extensions one by one to narrow down the issue and find the extension that causes the problem.

Disable Extensions in Chrome

Solution 10 : Reset Chrome Settings

Resetting Chrome to Initial Settings

Also ensure that you have latest Chrome version installed. You can check the current installed version and do the auto update by going to the URL “chrome://settings/help” or “chrome://chrome”.

Chrome Version and Update Check Command

Solution 12 : Delete and Reinstall Chrome

If none of the above listed solutions work for you then the final option is to completely delete the browser and reinstall. Of course this should be the last option since you may loose all the current settings on your browser.


We hope one of the above listed solutions should solve the err_connection_closed issue that affects your Chrome browser. If only a particular website does not open while all other sites are opening then the problem could be at the server side. Inform the webmaster of the site if you already know the details otherwise you should wait till the owner rectifies the error.

Fix 0X8007054F Windows Update Error

Many Windows users are complaining that they cannot upgrade their computers, when they try to do the same using Windows Update Assistant, the following error message and Windows Update Error 0x8007054F pop up.

You can contact Microsoft support for help with this error. Here is the error code 0x8007054f.

In this post, we are going to talk about this issue and see what you can do to resolve it.

What is Error 0x8007054f?

Error 0x8007054f is a Windows Upgrade error and is caused if there are some corrupted files on your computer. Usually, it’s the Windows Update files that are corrupted, but sometimes, the corruption can be related to some other system files. However, they can be easily resolved using various methods. Some might work for you, some don’t. So, it would be better if you go through the solutions one by one and try to resolve your issue.

Windows Update Error 0x8007054F

If you are seeing Windows Update Error 0x8007054F when using the using Windows Update Assistant, try the following solutions:

Run Windows Update Troubleshooter

Clean Software Distribution Folder

Reset Windows Update Component

Check Windows Update Services

Run SFC and DISM

Run Windows Update in Clean Boot

Let us talk about them in detail.

1] Run Windows Update Troubleshooter

Let us start by running Windows Update Troubleshooter and see if it can detect and fix the cause of the problem. It is a built-in tool, that when deployed can not scan and repair the issue. To run the troubleshooter, follow the prescribed steps.

Windows 11

Open Settings from the Start Menu.

Windows 10

Open Settings.

Hopefully, this will do the job for you.

If Needed: Windows Update Troubleshooter not working 

2] Reset Software Distribution and catroot2 folders

SoftwareDistribution folder contains temporary files that when corrupted and cause issues for you. We are going to clear the folder and see if the issue persists. But before that, we need to stop some of the services. So, run Command Prompt as administrator and run the following commands, one at a time, and hit Enter.

net stop


net stop bits

Now browse to the following location:


Delete all the files and folders inside it.

If the files are in use, restart your device. After rebooting, run the commands above again. Your Windows Store App needs to be closed.

Now you will be able to delete the files from the mentioned Software Distribution folder. Now in the Command Prompt windows, type the following commands one at a time, and hit Enter:

net start


net start bits

Finally, restart your computer and see if the issue persists.

Now you need to clear the contents of the catroot2 folder. The SoftwareDistribution folder is not the only Windows Update component responsible for causing this issue, there are some components that require a reset. You can use FixWin to clear the Software Distribution as well as the catroot2 folder.

Reset Software Distribution folder

Reset Catroot2 folder.

Your issue should be fixed.

3] Reset Windows Update Component

Reset Windows Update Component and see if that helps you.

4] Check Windows Update Services

Open Windows Services Manager and check the Windows Update related Services like Windows Update, Windows Update Medic, Update Orchestrator Services, etc are not disabled. The default configuration on a standalone Windows 11/10 PC is as follows:

Windows Update Service – Manual (Triggered)

Windows Update Medic Services – Manual

Cryptographic Services – Automatic

Background Intelligent Transfer Service – Manual

DCOM Server Process Launcher – Automatic

RPC Endpoint Mapper –  Automatic

Windows Installer – Manual.

This will ensure that the required Services are available.

Apart from the direct service, you should find the dependencies of Windows Update service and ensure if they are running or not.

5] Run SFC and DISM

You may also see the error code in question if the system files are corrupted. There are various factors that can corrupt the system files, but, you can easily repair the files using SFC command or DISM Tool.

Launch Command Prompt as an administrator and run the following commands.

sfc /scannow

If that doesn’t work, then try the next command.

DISM /Online /Cleanup-Image /RestoreHealth

After executing the command, restart your computer, and retry updating your system or running the Windows Update Assistant.

7] Run Windows Update in Clean Boot

You may also see the error code in question if your update component is interfered by a third-party application. You should perform Clean Boot and try downloading the update or running the Windows Update Assistant. If you are able to install the update, manually enable updates one by one and you will stumble upon the culprit, just remove that program and your issue will be fixed.

Hopefully, this will do the job for you.

How do I fix a Windows Update that won’t update?

If Windows is not installing the updates, no matter what, then there are several steps you can take to fix the problem. First, try running the Windows Update Troubleshooter to detect and fix common issues. If that doesn’t work, you can reset Windows Update components by stopping the Windows Update service, deleting the contents of the “Software Distribution” folder, and then restarting the service

Also read Windows Update Error 0x80246001.

Update the detailed information about Audacity Error Opening Recording Device, Error 9999 Unanticipated Host Error on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!