You are reading the article Cannot Change Or Modify Pin In Windows 11/10 updated in November 2023 on the website Moimoishop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Cannot Change Or Modify Pin In Windows 11/10
If you cannot change or modify your PIN in Windows 11/10. then this post offers working suggestions to help you resolve the issue. Windows has diversified its security features over the years and offers many options for signing in to your computer. One of the sign-in features is the Windows Hello PIN, with the help of Hello PIN, you can easily log in to your computer without entering any complicated password. But some users are facing a problem with changing or modifying the PIN in Windows. In case you are also facing this problem follow these suggestions.
Follow these steps before you proceed,
Boot your Windows
You are now signed in to your administrative account. Now, follow the below steps.Cannot change or modify PIN in Windows 11/10
If you cannot change or modify your PIN in windows 11/10, follow these suggestions:
Use Install Unlocker Utility
Use the Registry Editor
Use I forgot my PIN option1] Use Install Unlocker Utility
Unlocker is an application that’s used to unlock, move, remove, and rename locked files on a PC, and you can delete older PINs using it, as well. So, to change or modify the PIN in Windows 11/10, follow these steps.
Step 1: Create a new administrative account
Navigate to Command Prompt and Run as administrator
You need to create a new administrator account. So, execute this commandnet user administrator /active:yes
The above steps will create a new administrator account on your system.
Step 2: Download and install Unlocker Utility or any other free File Deleter software to delete locked files and folders.
Now, you can use the Unlocker Utility for the system. Using this, you can delete the current NGC folder from your system and create a new PIN.
Download and install the Unlocker Utility
After downloading go to the download location
Double-tap on the Unlocker Utility
Follow the on-screen instruction to proceed further
If any third-party tools are offered, uncheck their installation offers.
In the last step before installation, you must check the Explorer extension option
Finally, once the installation process is over, tap Finish to complete this process
Step 3: Delete the NGC folder
Now, you can remove the NGC folder from the system that stores the PIN-related information. Follow the below steps to do so.
First press the Window + E keys, which will open the File Explorer
In the File Explorer Windows, follow the below path to go to the NGC folder C:WindowsServiceProfilesLocalServiceAppDataLocalMicrosoft
Note: When you are going to the NGC folder, you might not find the AppData folder as it is usually hidden. So, to show all hidden folders in File Explorer, follow the steps given below.
Tap on the Options
In the Folder Options window, go to the View section
Now, check the Show hidden files, folders, and drives option
In the Unlocker Windows, choose Delete from the drop-down list
Now, that your NGC folder is deleted, restart your system, and log in again with your username and password. But if you are not able to access your account using your old password, you can use the Administrator’s account that you have created in the first step.
Now, try to add a new PIN.2] Use the Registry Editor
Registry Editor allows users to create a new PIN for the system. For device safety, we recommend you create a backup of the registry before you perform any change in your system. Follow these steps to create a backup.
Name your backup and save it somewhere on your computer
Here are the following steps to create a new PIN in Windows 11/10.
Press the Window + R keys to open Run
Now, on the Registry Editor window, go on this way HKEY_LOCAL_MACHINESOFTWAREPolicesMicrosoftWindowsSystem
Now, You need to create a new DWORD
Name the value as AllowDomainPINLogon
Now, double tap on it to change its value, and set the value to 1
Now, restart your system and, you can easily create a new PIN for your account.3] Use I forgot my PIN option
If the above steps do not work, you can use the I forgot my PIN option. Follow the below steps to use this option.
Now, you have to log in to your Microsoft account
Now, you will get a 6-digit code on another device to verify your account
Type the code in the appropriate location
After successful verification, you can reset your PIN
Now, type your new PIN twice
Now, you can log in to your account with your new PIN.
Read: Unable to add or use PIN sign-in option in Windows.How do I change my PIN on Windows 11?
To change your PIN, follow the below steps.
Confirm the account’s current PIN
Now, type your New PIN
Confirm the new PIN
After completion of the above steps, a new PIN will be applied to your Windows.
Read: Cannot log into Windows after UpdateWhat if I forgot my computer PIN?
If you have forgotten your computer password. So, in this situation follow the below steps.
Your Microsoft account will appear. You have to log into it
Now, you will get a 6-digit code in the email from another device
Apply code to verify your account
After successful verification, you can reset your PIN
Now, type your new PIN
Confirm new PIN
Now, you can log in to your account with your new PIN.
Read: How to remove PIN in Windows 11/10How do you bypass a PIN on a laptop?
If you want to log in to your account without entering the PIN, follow the below steps.
Press Window + R to open Run
Under the User, Accounts box select the account for which you want to remove the PIN
Uncheck the option User must enter a user name and password to use this computer
You're reading Cannot Change Or Modify Pin In Windows 11/10
If you’re tired of using the default system font on Windows 11/10, you can change it to your desired font with a simple registry tinkering. This will change the default system fonts of the desktop icons like Recycle bin, including title bar, message box, and others.
In the older version (Windows 7 or lower version) changing the default system font was not a big deal. It was quite easy and straightforward through personalization settings in the Control Panel. But for some reason, these settings were removed and users remained stuck with the default system font. You had to do just this:
Pull down the list item and choose the element you want to change the font, icon, for example.
Then pull down the Font list and choose the font to use. Then define its size and horns (bold or italic).
In this article, we will show how to change the default system font on Windows 11/10, including the way to restore the default system font using the Registry Editor. Before you proceed, one thing you must know is that without having proper skills, editing a registry is dangerous. It can damage your system permanently which might be irreversible. So, if you have a little knowledge of what you’re doing then you can skip it and ask a skilled person to complete the adjustment.Change default System Font in Windows 11/10
Before you go ahead and use the steps, do remember to create a system restore point first.
To get started, open Notepad first. You can open it using the Run command. Simply press Windows+R keys to launch the Run dialog box, type Notepad in the text field, then hit Enter to open the Notepad app.
In the Notepad app, copy and paste the following text code:Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionFonts] "Segoe UI (TrueType)"="" "Segoe UI Bold (TrueType)"="" "Segoe UI Bold Italic (TrueType)"="" "Segoe UI Italic (TrueType)"="" "Segoe UI Light (TrueType)"="" "Segoe UI Semibold (TrueType)"="" "Segoe UI Symbol (TrueType)"="" [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionFontSubstitutes] "Segoe UI"="NEW_FONT"
In the left pane, select the Fonts tab. You will see a large collection of the font family on the right.
Select the font you want to use from the list and also note its Official name. For example – Book Antiqua.
Now replace “NEW_FONT” with the font name you have selected from the Settings page. Because I prefer the font name “Book Antiqua” to be used in the entire system so, you can see the above image, I have replaced the “NEW_FONT” with the Book Antiqua in the registry code.
After performing the above steps, restart your computer and the new font will substitute in the entire system.
Read: How to change default font in Word, Excel, PowerPoint.Restore default system font on Windows 11/10
If you want the previous configuration on your Windows device, you can revert the changes using the following instructions:
Open the Start menu, type Notepad, then select the top of the result to open the Notepad text editor.
In the Notepad app area, copy and paste the following text code:Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionFonts] "Segoe UI (TrueType)"="segoeui.ttf" "Segoe UI Black (TrueType)"="seguibl.ttf" "Segoe UI Black Italic (TrueType)"="seguibli.ttf" "Segoe UI Bold (TrueType)"="segoeuib.ttf" "Segoe UI Bold Italic (TrueType)"="segoeuiz.ttf" "Segoe UI Emoji (TrueType)"="seguiemj.ttf" "Segoe UI Historic (TrueType)"="seguihis.ttf" "Segoe UI Italic (TrueType)"="segoeuii.ttf" "Segoe UI Light (TrueType)"="segoeuil.ttf" "Segoe UI Light Italic (TrueType)"="seguili.ttf" "Segoe UI Semibold (TrueType)"="seguisb.ttf" "Segoe UI Semibold Italic (TrueType)"="seguisbi.ttf" "Segoe UI Semilight (TrueType)"="segoeuisl.ttf" "Segoe UI Semilight Italic (TrueType)"="seguisli.ttf" "Segoe UI Symbol (TrueType)"="seguisym.ttf" "Segoe MDL2 Assets (TrueType)"="segmdl2.ttf" "Segoe Print (TrueType)"="segoepr.ttf" "Segoe Print Bold (TrueType)"="segoeprb.ttf" "Segoe Script (TrueType)"="segoesc.ttf" "Segoe Script Bold (TrueType)"="segoescb.ttf" [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionFontSubstitutes] "Segoe UI"=-
Once you have done, restart your computer and it will revert your system configuration to the default font.
TIP: Advanced System Font Changer lets you change System Font in Windows.What is the default font in Windows 11 or Windows 10?
Segoe UI is the default font in Windows 11 and Windows 10 families of operating systems. Segoe UI (User Interface) is a member of the Segoe family and it is used in most Microsoft products for user interface text, as well as for many of its online services.
How to Change Default Sound Output Device in Windows 11/10
There are four different ways using which you can change the default sound output device on Windows 11/10.
In the Taskbar Corner Overflow
In the Settings app
In the Control Panel
In the Game bar
Let’s get into the details of every way you can change the default sound output device.Easily switch between Headphones and Speakers 1] In the Taskbar Corner Overflow
To change the default sound output device,
2] In the Settings app
To change the default audio output device in the Settings app,
Open Settings app
You will see the list of available output devices under the Output panel
3] In the Control Panel
To change the default audio output device in the Control Panel,
Open Control Panel from the Start menu
Change the view to Small icons in the Control Panel
It opens a Sound pop-up window. You will see the list of available sound output devices under the Playback tab4] In the Game bar
To change the default audio output device in the Game bar,
Open Game bar using Win+G shortcutHow to set Audio device as default in Windows 10
We can change default Sound Output Device in Windows 10 in 4 quick and easy ways. We’ll explore this topic under the methods outlined below in this section:
Via Volume icon on Taskbar
Via Settings app
Via Control Panel
Via Game Bar
Let’s take a look at the description of the step-by-step process in relation to each of the method.1] Change Default Sound Output Device via Volume icon on Taskbar
To change Default Sound Output Device via Volume icon on Taskbar in Windows 10, do the following:
Note: You will not see an expansion arrow if you do not have multiple audio playback devices.
2] Change Default Sound Output Device via Settings app
To change Default Sound Output Device via Settings app in Windows 10, do the following:
Press the Windows key + I to open Settings.
Note: You will not be able to choose if you do not have multiple audio playback devices.
Exit Settings when done.3] Set Audio device as default via Control Panel
To change Default Sound Output Device via Control Panel in Windows 10, do the following:
Press Windows key + R to invoke the Run dialog.
In the Run dialog box, copy and paste the command below and hit Enter to open Sound settings.rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,0
To set the default playback/sound output device, do one of the actions below:
Select a playback device, and either:
Exit Sound settings panel.4] Change Default Sound Output Device via Game Bar
To change Default Sound Output Device via Game Bar in Windows 10, do the following:
Press Windows key + G to open Game Bar.
Select the default audio output device you want.
Note: You will not be able to choose if you do not have multiple audio output devices.
Exit Game Bar when done.
These are the different ways using which you can change the default audio output device on Windows 11/10.
Related read: No Audio on computer; Sound is missing or not working on Windows.How do I change the default audio output in Windows 10?
There are four different ways using which you can change the default audio output device on Windows 11/10. They are from the Settings app, Taskbar Corner Overflow or System tray, from the Control Panel, and the Game bar.How do I switch between headphones and speakers in Windows 11?
Sometimes our PC fails or refuses to recognize the External Hard Drive even after confirming the successful connection. The problem occurs mostly when the device driver is either corrupted or outdated. Such problems can be quite tricky to fix. You can spend hours but find no solution. Try these workarounds and see if the problem of the External Hard Drive not being detected in Windows 11/10/8/7 is resolved.Why is my external hard drive not showing up on my computer?
If your external hard drive is still not working, you may unplug it and try a different USB port. If it’s plugged into a USB 3.0 port, you can try plugging it into a USB 2.0 port. If it is plugged into a USB hub, try plugging it directly into the PC instead and see if that works.External hard drive not showing up or detected on PC
Before you begin, unplug the external hard drive from the port and insert it into another port. If it works, maybe your first port is dead. Alternatively, use another USB and check. If it works fine in both ports, perhaps your USB is dead.How do I fix Windows not recognizing my external hard drive?
If the External Hard Drive is not recognized, showing up, detected, working or accessible even after plugging it into Windows 11/10, follow our suggestions:
Run the Troubleshooters
Update or Reinstall the device driver
Create a new partition on your removable drive
Disable USB selective suspend setting
Enable and Format the Drive in Disk Management
Try Another USB Port (or Another PC)
Clean the Disk and Start From Scratch
Let us see these in detail.1] Run the Troubleshooters
The first thing you want to do is run the Hardware and Device Troubleshooter and the Windows USB Troubleshooter and check if it helps. The automated tools check the hardware/USB connected to the computer for any known issues and fix them automatically.
You could search for them via your Start Search, or you can access these Troubleshooters via the Windows 10 Settings Troubleshooter page.2] Update or Reinstall the device driver
If this does not work, uninstall and then reinstall the driver.
This post will show you how in detail to update or reinstall device drivers.3] Create a new partition on your removable drive
If you never connected your hard drive to your PC earlier and are trying to connect it for the first time, the drive may not be detected since you do not have any partitions created for it. However, the same may be recognized by the Windows Disk Management tool. So, verify if the Disk Management tool can locate the external hard drive.
Open Disk Management tool, go to Search, type chúng tôi and press Enter. If the external drive is found listed in the Disk Management window, format it properly so that it shows up next time you connect it to your PC.
If you see that the drive is unpartitioned or unallocated, the format and then create a new partition there and see.
If you need detailed explanations, this post shows how to create a new Partition using Disk Management Tool.4] Disable USB selective suspend setting
If the methods mentioned above do not yield the desired results, try disabling the USB selective suspend setting. Here’s what you can do.
You may also uninstall problematic drivers via Device Manager. Another solution would be to change the portable hard drive letter or backup all the important files first and then format the external hard drive using Disk Partition Software.5] Enable and Format the Drive in Disk Management 6] Try Another USB Port (or Another PC)
It is possible that the USB port may have an issue depicting any hardware. Most of the laptops and desktops come with multiple USB ports, and one of them should work even in the worst case. You can also cross-check in the BIOS if the USB port is disabled, if yes, then enable it.7] Clean the Disk and Start From Scratch
If nothing works on your PC, then the best bet is to connect to another PC and format the DISK on that computer. Once done, connect the disk back to the computer on which you want to use it.How do I get Windows 11/10 to recognize my external hard drive?
If you cannot find it there, you can run the following command on elevated Windows Terminal to launch the Hardware Troubleshooter.msdt.exe -id DeviceDiagnostic How do I fix my external hard drive not showing files?
If you have just connected your drive, wait for a few seconds to let Windows load everything. However, if it’s been a while and there are no files, you will need to run the Disk Check software from the OEM or CHKDSK in Windows to fix any header or master table corruption.Assign Drive Letter to Hard Disk Volume
Unless a drive letter is assigned to Hard Disk, it will not show up in the File Explorer. You will need to use the Windows Disk Tool to achieve this.
Choose Change Drive Letter and Path.
Once done, File Explorer should instantly recognize it.How do I fix my external hard drive not showing files?
If the drive is available on the PC, but you cannot see any image, check if the files are hidden. You can enable the View Hidden File option using the File Explorer.Why did my external hard drive suddenly disappear?
It happens when the connection is not set properly. Check if the USB plug to which the drive is connected is loose. If that’s the case, you need to get a new pair of wires that you can connect to the PC. If this is not the problem, the hard drive has an issue, and you may want to get it checked.Where did my files go from SSD?
If you are not the one deleting the field from your SSD, then it won’t vanish on its own. Check if there is a program you are using that moves from this drive to somewhere else. Some external drives also come with a hardware lock that blocks any kind of modification. If you have one such, then enable it.
Let us know if anything here helped you.
If you need more ideas, see these posts:
When we refer to files like MP3s, ZIPs, or PDFs, we’re referring to the file type (or file extension) that allows the operating system to identify what type of file it is and what software is needed to open it. This is how Windows or macOS can determine that an MP3 file needs to be opened by your music player, or a PDF by a PDF reader.
If the file has the wrong file type, then Windows will use the wrong program to open it. This will probably cause an error and stop you from accessing your file—after all, Microsoft Word can’t handle MP3s. If you need to figure out how to change file types in Windows 10 the right way, then you’ll need to follow these steps.
Table of ContentsCan You Change File Type in Windows 10?
A file extension acts as a way for Windows to determine what to do with a file. It tells the Windows operating system that, when you open an MP4 file, it should open VLC (if it’s installed on your PC). Or when you open a DOCX file, it should open Microsoft Word. For every file type the operating system knows, it’ll match the file extension to software that should be able to open it.
It’s possible to change the file type for files in Windows 10, but this depends on the file itself. Changing file types isn’t just about changing the extension at the end of a file name. If a file isn’t created the “right way” then simply changing the extension won’t work.
Changing the extension doesn’t change what the file ultimately is. An MP3 isn’t a Word document, so changing the file type from MP3 to DOCX won’t suddenly make Word a music player. However, if the file types are similar (for instance, JPG and PNG), then the software may still be able to open the file.Displaying File Extensions in Windows File Explorer
Previous versions of Windows showed the file extension for files in Windows File Explorer. In Windows 10, these extensions are hidden by default, preventing you from quickly changing the file type.
If you want to change file extensions using Windows File Explorer, you’ll need to change the setting to view hidden file extensions.
In the View tab of the Folder Options window, make sure that the Hide extensions for known file types checkbox is disabled, then select the OK button to save.
With this setting disabled, you should now be able to view file extensions as part of each file name in Windows File Explorer.Renaming a File Extension Using Windows File Explorer
With file extensions visible, you can start changing file types by renaming the file and replacing the old extension with the new extension. For instance, replacing file.txt with file.doc would turn a TXT text file to a Word document in the older DOC format. As the file contains text, Word should be able to understand and open it.
However, this only works because software like Word is often smart enough to recognize the contents of certain files, filling in the gaps where it can to open the file. Where changing TXT to DOC would work, this wouldn’t work with the newer DOCX format for Word document, as this newer file type is much more complex.
Windows will warn you that changing file extensions in this way can break the file. If you’re sure you wish to continue, select OK to confirm.
Once confirmed, the file extension will be changed and the file will be listed as the new file type in the Type column. Depending on the file extensions used, you should now be able to open the file. If the process hasn’t worked, rename the file and return it back to the previous extension.Saving a File in Another File Format
Renaming a file type in Windows File Explorer doesn’t change the file’s data and can only work in certain (limited) circumstances. If you want to change a file extension properly, you’ll need to save or export it to another format.
This works well with file types that are related. It’s easy enough to change a DOCX file to a PDF, or a BIN to ISO, but it’s more complex to change between very different types. For instance, while a PDF can be exported as images, you can’t simply rename a PDF file to the PNG format.
You’ll need to check what file extensions are supported by the software you’re using. If you want to export your file to a format it doesn’t support, then you’ll need to look for alternative software or consider converting it online using a file conversion website.Changing File Types Using Online Services
If you don’t have the software to convert a file from one file type to another, you can use online services to do so. Once you upload the file, the remote server will convert it, allowing you to download the file in the new format.
You should make sure to only do this with files that you’re happy to share. Uploading important documents to an unknown server is probably not the wisest idea, especially if you’re worried about online privacy. For non-essential files, however, using this method should be perfectly safe to try.
Given the huge number of different file types out there, it isn’t possible to recommend one service or another. If you do want to try a service like this, however, then try a quick Google search.
For instance, searching for convert x to y (replacing x with the original file type and y with the new file type you want to use) should provide you with a list of potential results.Managing Files in Windows 10
Once you know how to change file types in Windows 10, you can deal with software conflicts as they occur. You can also safely convert files from one type to another, from music file conversions on your PC to converting PDFs to Google Docs online. If the file is in a similar format, you can even try renaming the file extension itself.
Printers are devices that convert text and graphic outputs from a computer to paper. We frequently use printers to print documents, reports, images, etc. for various purposes. However, some Windows 10 users have reported an error where they ‘cannot remove printer Windows 10’.
Here I shall discuss how you can solve this error on your device using six simple methods.
If you cannot remove your printer from Windows 10, there might be some driver error which is making you unable to delete your printer. You might be able to fix this by deleting the printer driver from the Print Server Properties window in Windows 10.
To remove the printer from the Printer server, follow these steps:
Open Control panel. You can do this either from a Run dialog or from the control panel.
Change the view to Large or Small icons depending on your preferences, if you see it set to Categories.
Select your printer from the list of available printers.
Go to the Drivers
Select your printer from the list of installer printers.
Remove your printer driver and software from the Windows Settings app.
If you see that this method fails and you cannot remove printer in Windows 10, you need to stop the print spooler service.
The print spooler handles the print jobs sent to your printer and any error to the spooler service can lead to you getting the Windows 10 cannot remove printer error on your device.
Open a Run dialog by pressing Win + R.
Type services.msc and press Enter to launch the Services console.
Check the status of the service. If you see that it is already running, first stop the service using the Stop button.
Open a Run dialog again using the Win + R keys.
Type %WINDIR%system32spoolprinters and press Enter to open the printer spool.
Delete all the files in the folder that opens.
Go back to the Services console, and open Print Spooler properties again.
Close the Services console and re-attempt removing the device from your computer.
Now you should be able to remove the printer easily from your device.
If you cannot remove a printer from your Windows 10 device, there might be some registry changes that you need to make before you are able to remove the printer itself.
To remove printer from registry, follow these steps:
Open a Run dialog by pressing Win + R.
You will see that the Printers key in the left pane is expanded.
Restart your PC once you have deleted the key.
Once you have deleted the registry keys for your printer, try removing your printer from the Devices section of the Windows 10 settings app. You should be able to remove the printer without any trouble.
Many users have reported that they were able to remove the misbehaving printer from the Print management application tool. This seems fairly simple to do, and you need to follow these steps to remove your printer using the Print management tool.
Open the Windows Search by using the keyboard combination Win + S.
Type Print Management, and select the first result from the list.
In the middle pane, locate your printer from the list of available printers.
This should allow you to delete your printer from your Windows 10 device.
If you prefer using command line interpreter tools, you can also use Command Prompt to delete your printer. You need to follow these steps to delete your printer:
Open an elevated command prompt window. To do this, open a Run window by pressing Win + R, type cmd and press Ctrl + Shift + Enter to launch the Command Prompt with administrative privileges.
wmic printer get name
Locate the name of your printer.
The printer that you specified in the command should be deleted from your computer.
Upon uninstalling the printers from your device, you also need to remove the registry entries for the drivers corresponding to your printer. Follow these steps to delete the driver entries from your device.
Open an elevated command prompt window. To do this, open a Run window by pressing Win + R, type cmd and press Ctrl + Shift + Enter to launch the command prompt with administrative privileges.
net stop spooler
Open a Run dialog by pressing Win + R.
For 64bit devices:- ComputerHKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrintEnvironmentsWindows x64DriversVersion-4
Now open File Explorer. You can use the keyboard shortcut Win + E.
Delete all files from C:WindowsSystem32spooldriversw32x863 If you have C:WindowsSystem32spooldriversw32x861 or C:WindowsSystem32spooldriversw32x862 folders on your PC, make sure to delete all files from those folders as well.
net start spooler.
So there you have it. Now you know how to resolve the ‘cannot remove printer Windows 10’ error on your device using the solutions provided above. Comment below if you found this useful, and to discuss further the same.
Update the detailed information about Cannot Change Or Modify Pin In Windows 11/10 on the Moimoishop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!