You are reading the article Do You Know How To Unlock A Hard Drive? Find Out Now! updated in December 2023 on the website Moimoishop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Do You Know How To Unlock A Hard Drive? Find Out Now!
Have you lost your hard drive password? Can’t unlock it and all of your important data are at stake? No need to worry at all! We are here with a few easy hacks to ease your difficulties within minutes. Scroll through to know how to unlock a hard drive?
According to the leading hard drive manufacturers’, once you forget the hard drive password, there is no further way to recover it or restore your data. Hence, you have to erase all the data along with the password to again get your HDD or SSD in usable condition.
But that is not the same case if it happens during a install or restore or just in case all of a sudden out of nowhere.
We have shown a VIDEO walk through at the end of the post for easy solution.
Well, this error can occur anytime in your Windows PC. You might see a blue screen of death that creates a strong barrier. You can’t even access a single piece of data in this situation.
In case you are putting the correct password; still, your hard drive is locked, then there are some other causes responsible. It can be a hardware failure or corrupted malware.
However, it’s time to know the tricks of how to unlock hard drive?
Several ways are there to bypass the Hard Drive password and get it in the working mode again. We are going to talk about basic yet effective ones. Look below for the full scoop!
Firstly, you need to check your disk and confirm there is no issue. Follow the below steps to perform the disk check.
You have to install the USB drive or the boot disk after powering on your PC. Now you will see a flashing message at the bottom of your display. The message will instruct you to press F8 or F12. Do that to open the boot menu.
After that, hit the “troubleshoot” option
Finally command prompt will open- black MS-DOS screen
Type “chkdsk D: /f /x /r” there and press the enter button
Give it a few minutes and wait for it to get finished. Once done, type “exit” and hit the enter button. Now your PC is ready to reboot.
If this solution doesn’t work, then you must try our next one. It will surely help you with your locked hard drive.
Once you are done with the solution 1 but the issue is still there, then you must perform a system file check to unlock the hard drive.
At first, open command prompt following the steps of solution 1
Next, type “sfc/scannow” there and wait for a few minutes to let it run
After that, type “exit” and hit the enter button to return from DOS
Now reboot your system. If the issue persists, try our next solution.
When you have corrupted boot files, you must reconcile those files to bypass hard drive password. At first open command prompt by following the steps of solution 1. Then, perform the below steps.
Type “bootrec /RebuildBcd” in your MS-DOS and hit the enter button
Next, give it a few seconds to run and type “bootrec /fixMbr”
Before you proceed to the next step, you must wait for a few munites
Now put the command “bootrec /fixboot” and hit enter again
Once this process runs, type “exit” to get out
Now restart your Computer and check whether the hard drive is still unlocked. If yes, then try Solution 4.
If your hard drive has got locked recently, then this process is going to resolve your issue. A system restore doesn’t erase all the files or folders from your hard drive. Instead, it restores all the drivers, non-Windows files, or software from a previously known “good state.” How to do it? You can either follow the below steps or check out this details steps on how to restore a PC.
Firstly, use your USB or disk for booting
Then, hit the “repair your computer” option
Now you have to choose a date when your PC was working correctly, or you want the data of which time
Now you have to give access to the wizard to run
Finally, restart your PC and see you can use it smoothly or not. If not, then here is our solution 5. Check it out.
Always remember that refreshing your PC won’t harm your data. So follow these steps after booting your PC to complete the troubleshooting process.
Firstly, hit the “repair your computer” option
Finally, select “refresh your PC”
Now it will take up to several minutes to complete the process after that reboot your PC to check if the step is valid or not. If not, then try to use some tools to get your job done.
You can remove the password of your hard drive with the HDD Unlock Wizard easily. This user-friendly application supports IDE and SATA hard disk drives. All the passwords, including master and user, will be erased. Your HDD will be re-certified, that means you will lose all stored data.
HDD Unlock Wizard takes help of the proprietary unlocking algorithms. Hence it removes the unknown password and makes your hard disk usable again.
Also, you can use a hard drive password reset software like Ultimate Boot CD to unlock your hard drive.
You're reading Do You Know How To Unlock A Hard Drive? Find Out Now!
How To Check What Hard Drive You Have On Windows 11/10
Most of the consumers have a laptop or a desktop computer, but they have no idea what kind of storage device they use. For example, an SSD makes a huge difference in performance compared to HDD. In this post, we will show how to check what Hard Drive you have on Windows 11/10.
How to check what Hard Drive you haveWhat Hard Disk do I have? Do I have an SSD, HDD, or Hybrid Drive? How to check the Specifications & RPM of the Hard Drive of your Windows computer? These are some of the questions we will try to answer using inbuilt solutions and free software applications.
Using Device Manager
Using the MSInfo32 Tool
Using PowerShell
Using a third-party tool
Not all the tools can display RPM and Media type of the hard disk. Some of them only find the model number, while others can only tell you the RPM. Be aware that a Solid State Drive doesn’t have RPM, i.e., there are no spinning platters like HDD.
1] Using Device ManagerWhile the Device Manager doesn’t directly display RPM or Disk type, it can have other details, including the model number of the storage device.
Use WIN+X to open the Power menu and select Device Manager
Navigate the tree and locate Disk Drives. Expand it
Switch to Details section, and then select Hardware IDs from the Property dropdown.
The model number will be available along with some other details. So in this case, it is DISKST3500418AS. Hence the model number would be ST3500418AS
Now search the model number in Google or on Amazon. Wwbsites like chúng tôi can give you the complete information. If the drive is an SSD, it will be mentioned explicitly.
2] Using the MSInfo32 ToolYou can also use the msinfo32 tool in Windows to find the manufacturer and model number. Once you have that search on Google or any website which offers details based on the model number of the hardware. Sometimes the model name in the listing will have SSD included in the MSInfo32 tool. Otherwise, you will have to search via the device model number.
3] Using PowerShell
Use WIN + X to open power menu and select PowerShell Admin to launch it
Type and run the command Get-PhysicalDisk
The output will have a column with the name Media Type.
Check if it is HDD or SSD
To find the RPM using PowerShell, you will need to run the following command as mentioned in this thread.
$ComputerName = ".", "." ForEach ($C in $ComputerName) { $Hash = @{ "ComputerName" = $C "namespace" = "rootMicrosoftWindowsStorage" "Class" = "MSFT_PhysicalDisk" "ErrorAction" = "Stop" } Try { Select-Object -Property @{N="ComputerName"; E={$C}}, @{N="Speed(RPM)";E={$_.SpindleSpeed}}, DeviceID, @{N="Supported";E={$True}} } Catch { $Obj = New-Object -TypeName PSObject -Property @{ "ComputerName" = $ComputerName "Speed" = $Null "DeviceID" = $Null "Supported" = $False } Write-Output $Obj } }You can also use Disk Defragmenter and Windows Command Prompt to find out if it is an SSD or HDD.
4] Using third-party toolsCrystal Disk Info is a handy tool if you want to check the health of your hard disk. While the software doesn’t tell about SSD or HDD, it can show RPM of the storage device.
Free PC Audit is another free tool that is one of the rare tools that can find Media Type for the storage device. Once you locate the disk section, expand it, and select media type to see if the storage devices are SSD or HDD. Download it from the official page.
If you want to upgrade to SSD, but aren’t sure if full SSD configuration works better or HDD, then read our ultimate guide on Hybrid Drives.
I hope the set of recommended tools were useful to check what Hard Drive you have on Windows 11/10.
How To Fix A Corrupted External Hard Drive On Xbox One
The Xbox One gives the user the ability to attach an external hard drive. This is important for those who have no interest in pulling down the Xbox One to replace the internal hard drive. At times, the external hard drive may get corrupted. In this post, we will see how to fix a corrupted External Hard Drive on Xbox One.
Fix corrupted Xbox One External Hard DriveIt is much easier to add an external hard drive to store hundreds of games, apps, or whatever else is supported. There are multiple ways to fix this problem and were going to discuss the ones that make sense rather than a bunch of random solutions.
Check if the Xbox One recognizes the drive
What if the drive has not been detected?
Adjust the power management for the storage if you’re in instant-on mode
Some other things you can try
Format the hard drive
1] Check if the Xbox One recognizes the driveBefore we begin though, we must determine if the problem lies with the Xbox itself, or the hard drive. To do this, please unplug the hard drive from the Xbox One and plug it into your computer. If the hard drive works, then the issue is linked directly with the Xbox. However, if the hard drive fails, we need to drop it back into the Xbox and format it.
Press the Xbox button on the controller to fire up the Guide.
Next, you must select Profile & System.
After you’ve done that, please select Storage Devices.
If the hard drive is listed, your console has detected it, so things should be fine.
2] What if the drive has not been detected?In a situation where the drive has not been detected, then the best course of action right now is to ensure all recent updates have been installed to the Xbox One.
Again, please press the Xbox button to launch into the Guide.
Navigate to Profile & System.
From there, go ahead and select Settings.
If you see the words, Update Available, then there are updates for installation you need to attend to.
After installing the update, return to the Settings area.
3] Adjust the power management for the storage if you’re in instant-on modeIf the above solutions have failed to work accordingly, then we suggest adjusting the power management.
Press the Xbox button on the controller to fire up the Guide.
From this area, then, you must confirm the Power Mode is set to Instant-on.
After the confirmation, uncheck When Xbox is Off, Turn Off Storage.
Restart the Xbox One console.
Return to the Settings area promptly.
4] Some other things you can tryBefore we talk about the nuclear solution, we must first try these other options that could work despite being very basic.
Unplug and reconnect the hard drive.
Connect the drive to a different console.
Turn off the console and power it on again.
Check the official website for the hard drive manufacturer for support.
5] Format the hard driveFinally, we need to format the entire drive. Doing this will delete all contents on the drive, which is why we view this solution as nuclear. The option to take when everything else has failed.
Open the Setting menu on the Xbox.
From the left panel, select System.
After that, please go ahead and choose Storage.
You should now see Storage Options.
Follow the instructions on the screen.
When the formatting procedure is done, select the OK button.
Check now to see if the hard drive is working correctly.
Read: How to change language in Xbox 360, Xbox One, Xbox Series X/S
Why did my external hard drive stop working on Xbox one?Your external hard drive is probably no longer working on your Xbox One due to corruption, or maybe the drive has not been connected properly. We suggest unplugging the drive from the USB port, then plugging it in again to see if things will change for the better.
What hard drive can I use for Xbox One?The Xbox One is like a computer in many respects, which means it will support most hard drives today, including solid-state drives. As long as the drive supports USB 3.0, users should have few problems. However, you will have to set it up using the Xbox Console so it can manage according to its format, and requirements.
How To Pick A Hard Drive For Video Editing On Ipad
Video editing on an iPad? Yes, the idea of doing any sort of serious content creation on Apple’s popular tablet may seem a little ambitious, but the truth is that these thin and light mobile computers are now capable of some serious video work. Unfortunately, they can sometimes also be short on storage!
Why not just get an iPad with a large amount of internal storage? Well, for one thing, if you already own an iPad you can’t simply increase the internal storage. This means that either way, you’ll have to buy a new tablet in order to get the capacity you want. The problem is that the high-performance, high-quality solid state memory Apple uses comes at a massive price premium. This means that it’s far, far cheaper to buy an external hard drive if you want to do iPad video editing with large media files or multiple projects.
Mechanical drives are of limited useMechanical external hard drives work just fine with the 2023 12.9-inch iPad Pro I tried it with, Wwich is great when you have to grab some documents or copy a small amount of information from an archival disk.
The problem is that the relatively low speeds become a problem fast. It’s not just how slowly video files transfer, for high-quality video files simply trying to watch or scrub through a clip can lead to stuttering.
External SSDs are almost perfectWe tried two different external SSDs with the 2023 iPad Pro via its USB-C port and the difference in performance is phenomenal. Of course, it’s not news that solid state drives are far faster than mechanical drives, but in this case, it’s the difference between making video file handling feasible and making it a waste of time.
The two drives we tried are a Samsung T5 500GB drive and a Seagate Fast SSD 500GB. The Samsung was a touch faster, but the significantly cheaper Seagate was also more than adequate. Previewing video files (even 4K files) worked flawlessly directly from the drive. Likewise, transfers to and from internal storage happen at breakneck speeds. These drives are in the 500 megabytes per-second theoretical ballpark, which means it doesn’t feel any slower than working from the internal memory. Which is where we get to the one major roadblock on the way to true mobile video editing.
Except for the software limitationsWe tested these drives with the LumaFusion video editing app. At the moment this is the best-known “serious” video editing software on iOS. Until ports of Final Cut Pro or Premiere arrive, that is. LumaFusion works brilliantly and it does support external storage, but you can’t work with clips directly from your external drive. They must be imported to internal storage first. If you have an iPad with 64GB of storage or even the 256GB model, that means you’ll have to swap projects out on a regular basis.
So here are the key lessons I learned when trying to find the right drive:
Mechanical external hard drives are simply too slow for practical use in iPad-based video editing
Using a USB-C hub for drive-to-drive transfer, mechanical drives are still relevant for archival
External SSDs have become very affordable, especially compared to the cost of internal iPad storage
Video editing apps still have some catching up to do, but it’s already a feasible solution
There was little practical performance difference between the Samsung T5 and Seagate Fast SSD. Additionally, write endurance is less important in this scenario, since the external SSD is not being used as a media cache. In the future, should applications allow it, write endurance will matter on external drives if the media cache can be moved there.
Are you using an application like LumaFusion to edit videos on iPad? We’d love to hear about your own experiences with this rapidly maturing platform.
FTC: We use income earning auto affiliate links. More.
What Is An External Hard Drive?
Last Updated on July 22, 2023
There are many parts to a computer and sometimes trying to work out and explain what each of those parts are can get a bit confusing. One of the most important parts of a computer is a hard drive. And as well as internal drives, there are also external hard drives. But what are both of these things?
In this article, we’ll be explaining what an external hard drive is and hopefully, you’ll go away with the information you need to be able to explain it to other people!
Today’s best modem deals!Custom URL
editorpick
Editor’s pick
Save 13%
ARRIS SURFboard SBG7600AC2 DOCSIS 3.0 Cable Modem
Best Deals
Deal @ Amazon
*Prices are subject to change. PC Guide is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more
What Is A Hard Drive?So to start off, let’s get into what a standard hard drive is.
A hard drive is a part of a computer that sorts the operating system (or OS for short), data files (such as documents), any applications found on the computer, pictures, and music. Basically, anything file that exists on the computer.
Hard drives can hold a great deal of information and your computer isn’t going to function without one. Most hard drives are quite cheap as well, so if you need to replace one, you don’t have to spend too much money replacing them.
There are drawbacks to a hard drive though. The biggest drawback is if they suddenly stop working and you haven’t backed up any of the data from your computer, you’ll potentially lose that data forever.
If the hard drive can be fixed, or data recovered, some of it may be saved. But it is always better to backup just in case.
Another drawback hard drives have is that they can be quite slow, especially when you’re opening very large files or applications, and particularly compared to SSDs (solid state drives).
What Is An External Hard Drive?An external hard drive is pretty much exactly the same as a normal hard drive, but it isn’t connected inside a computer.
External hard drives usually come as a separate unit, can be quite small, and can hold a large quantity of data. They are usually attached to the computer via USB and can be disconnected and reconnected whenever the user sees fit.
External hard drives are great for extra storage or for keeping any important files on. If your internal computer hard drive ever fails or corrupts, anything that is stored on your external hard drive will be safe.
Because of that, if you have a lot of files that you consider to be important, it’s in your best interest to invest in an external hard drive. They are the best backup devices for a computer and you can save you a lot of time and hassle if anything ever happens to your computer.
But just like an internal hard drive, external hard drives do have their drawbacks.
Both normal hard drives and external hard drives can get hot and overheat, and this can sometimes cause issues to both your computer and your hard drives. Plus, because hard drives function mechanically, they are more prone to fault than SSDs.
Additionally, because external hard drives aren’t part of your computer, and can be detached and moved, you can lose them if you aren’t careful. It’s always best to keep your external hard drive in a safe, secure place when it’s not in use.
ConclusionExternal hard drives are a good investment should you need a backup solution to be kept separate from your computer.
But remember, you need to look after an external hard drive and keep it safe and secure too.
How To Fix Raw Hard Drive To Ntfs In Windows 11/10
On your Windows 11 or Windows 10 computer, if you open the Disk Management tool and you see that an SSD or HDD drive showing as RAW partition, that is because the volume is damaged and has lost its file system type. This post offers suggestions that will help you fix RAW hard drive to NTFS without losing data on your computer.
When an SSD or HDD partition is shown as RAW in Disk Management, it could be either of the following:
The hard drive partition is not formatted with the FAT12, FAT16, FAT32, and NTFS/NTFS5 file systems and does not recognize the file structure on the partition.
If you take a drive formatted for Mac systems and plug it into a Windows machine, the partition will show up as RAW.
If a partition is corrupted it may also report as RAW.
In any case, you will be unable to access the data on any RAW partition/volume. The following are the many symptoms you will likely encounter when your hard drive partition becomes RAW:
Fix RAW hard drive to NTFS on Windows computerIf you see any SSD or HDD drive or disk or partition listed as a RAW partition in the Disk Management tool on your Windows 11/10 PC, then our suggestions as provided below in no particular order are intended to help you recover and restore the partition.
Shrink Partition/Volume
Recover your files/data and convert RAW to NTFS
Run CHKDSK
Clean the disk and create a new primary partition
You can fix RAW hard drive to NTFS without losing data! Let’s look at the description of the process as it relates to each of the suggested fixes. These solutions apply to removable drives as well.
1] Shrink Partition/VolumeA viable solution to fix the RAW partition on your Windows 11/10 computer is to shrink the partition. When you shrink a partition, the file system information is rewritten and corrects errors. Shrinking the HDD/SSD does not remove files, it just allocates the free space and creates a new unallocated partition that can be used for a new OS. In most cases, you may need to shrink a partition If you discover that you need an additional partition but do not have additional disks. There is no need to reformat the disk to shrink the partition because when you shrink a partition, any ordinary files are automatically relocated on the disk to create the new unallocated space.
Read: Fix Unallocated Hard Drive without Losing Data in Windows
2] Recover your files/data and convert RAW to NTFSYou can download and install the MiniTool Power Data Recovery on your PC to recover your files/data by following these steps:
Launch the application after the installation.
From the Main interface, you’ll have access to several options like This PC, Removable Disk Drive, etc.
Now, select the partition that you want to scan for the lost files.
As the scan progresses, you’ll be shown more and more files.
Once the data recovery process is complete, you will get a prompt that the recovery has been successful.
You can now exit MiniTool.
On the other hand, as already pointed out, if you have moved a drive from macOS to Windows and you see the RAW partition, you should be able to easily recover the data by moving the drive back to a Mac system that supports its partition layout.
Using reputable data recovery software should get your files back as often when a partition becomes corrupted as RAW, it is usually the partition table that becomes corrupted, not the actual data on the drive and most data recovery programs are designed to rebuild this table.
Read: How to Recover Lost or Deleted Data from Windows PC
3] Run CHKDSKThis solution requires you to run CHKDSK to repair errors or bad sectors that might be the cause of the RAW partition issue on the drive. To perform this task, follow these steps:
Press the Windows key + R to invoke the Run dialog.
In the Run dialog box, type cmd and then press CTRL + SHIFT + ENTER to open Command Prompt in admin/elevated mode.
In the command prompt window, type the command below and hit Enter.
chkdsk /x /f /rYou will receive the following message:
CHKDSK cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N).
Press the Y key on the keyboard and then reboot your computer to run the utility to fix the errors on the computer’s hard drive.
After CHKDSK completes, check to see if the issue is resolved. Although, you are most likely to see the following error message CHKDSK is not available for the RAW drives error message, in which case, you can proceed with the next solution. Keep in mind that you may need to replace your hard drive if the hard drive has failed, or disk failure is imminent which you can detect by running a S.M.A.R.T check.
Read: Fix Disk Management errors on Windows
4] Clean the disk and create a new primary partitionAs opposed to Solution 1] above, assuming you don’t need the data on that RAW partition, you can use DiskPart to clean the disk and create a new primary partition to replace it. To perform this task, follow these steps:
Open Command Prompt in elevated mode, type diskpart, and hit Enter.
Next, enter the following command and hit Enter:
list diskYou should see the list of all hard drives connected to your computer.
Find the number that represents the RAW hard drive and enters the command below be sure to replace 0 with a number that matches your hard drive.
select disk 0
Next, run the following commands and press Enter after each line:
attributes disk clear readonly clean create partition primary Select partition 0 active format fs=ntfs quick assignAfter running the commands, type exit and hit Enter to close Command Prompt. Now, see if the issue at hand is resolved. If not, try the next solution.
Read: We couldn’t format the selected partition – Error 0x80070057
Any of these fixes should work for you!
Can CHKDSK fix the RAW partition?It is more than 90% unlikely that the CHKDSK and Error Checking tool would fix the RAW partition issue. However, it is possible you can convert the RAW file system to the NTFS file system by using a command line.
Related: Repair damaged RAW Drive without formatting or losing Data
What does it mean if my SD card is RAW?If your SD card is RAW, it simply means the file system is damaged. There could be other reasons for this issue as well. A RAW SD card, unfortunately, becomes unreadable by any operating system. RAW, here, means “raw material” which to use the SD card, you should format it NTFS/FAT/exFAT file systems.
Update the detailed information about Do You Know How To Unlock A Hard Drive? Find Out Now! on the Moimoishop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!