You are reading the article How To Unbrick Or Restore Verizon Galaxy Note 3 Sm updated in December 2023 on the website Moimoishop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Unbrick Or Restore Verizon Galaxy Note 3 Sm
Well, what we can do now is try to restore your Galaxy Note 3 back to stock using a firmware so that all bad partitions on the device are fixed and it doesn’t bootloops and restarts normally.
And well, depending on what you were trying to do, and more importantly how, it could either be soft-bricked or hard-bricked — in latter case, as sad as it is, you maybe out of luck, man!
What’s Hard-brick and Soft-brick?
Even though rare, and when you are like set to be doomed, your Galaxy Note 3 might get hard-bricked. In which case, the Galaxy Note 3 won’t boot into download mode — it won’t respond to key combinations you are trying to make it to boot normally or to download or recovery mode.
Hard-brick results in one dead Android device. Yes, it’s sick, and worrying. You may have to look for a JTAG service locally; the person with good knowledge of that may be able to revive it. Oh, you can also try using USB Jig (look on ebay, perhaps!) to reboot the Galaxy Note 3 into download mode, but it may or may not work!
Hard-brick is rare, it may happen only when power supply gets disturbed of computer and/or Android device when something is being installed/updated on the device. Or, when you totally mis-do things totally recklessly. That’s why you have to be very careful with even the easiest steps.
Let’s see soft-brick now. Normally, a brick is a soft-brick, which means your device isn’t completely dead, that it is just not able to boot normally and gets stuck somewhere. And, download mode is working.
How to identify bricked Galaxy Note 3?
If your Android device can boot into download mode, then it means it’s a soft-brick. If it cannot, then it’s hard-bricked.
Cases of soft-brick:
Bootloop: Your Galaxy Note 3 is not restarting properly and gets stuck at logo, and reboots again and again on it. Mostly occurs when you flash something bad.
Corrupted but working: Your Galaxy Note 3 can’t power On, but is entering the Download mode and/or Recovery mode on pressing the key combinations. That is, it’s responding to key combos, at the least.
Any other case: As it doesn’t matter what happened, as long as you can access Download mode using the key combos specified in the unbrick Galaxy Note 3 guide below, you’re good — no reasons to worry!
Solution?
Just install the firmware using the guide below and your Galaxy Note 3 shall be up and running coolly soon enough! you must be able to enter download using the key combinations specified in the guide below.
Cases of Hard-brick:
Well, if you can’t enter download mode using the key combinations specified in the guide below, you got a worry — your device is hard-bricked. You can’t repair it yourself unless you are able to reboot it into download mode.
Solution?
You can try USB Jig to enter Download mode but there is no guarantee it would work. Your last hope is JTAG: find a local service provider who can us the JTAG for you and revive your dead hard bricked Galaxy Note 3. You can use Google to buy JTAG and try it yourself but we don’t recommend it at all, at it requires the skills of a knowledgeable person in Electronics.
Let’s see now how to unbrick or restore or fix a bricked Galaxy Note 3.
How to Restore Verizon Galaxy Note 3 to Unbrick and Fix it
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
VERIZON GALAXY NOTE 3 SM-N900V OFFICIAL JELLY BEAN 4.3 FIRMWARE
Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N900V!
Do not use the procedures discussed here on any other Galaxy Note 3 (including the Galaxy Note 3 variant at Sprint, AT&T, T-Mobile and other International variants like SM-N900 & SM-N9005) or any other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVER
You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Verizon Galaxy Note 3. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Note 3 on your computer.
► SAMSUNG GALAXY NOTE 3 DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS
DOWNLOADSDownload the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.
ODIN ZIP FILE FIRMWARE ZIP FILE STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might delete internal sd card too, your files will remain safe on PC.
Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe
Extract/Unzip the Firmware zip file, N900VVRUBMJE_N900VVZWMJE_VZW.zip on your computer (using 7-zip free software, preferably) to get this file: N900VVRUBMJE_N900VVZWMJE_N900VVRUBMJE_HOME.tar.md5
Move the firmware file, N900VVRUBMJE_N900VVZWMJE_N900VVRUBMJE_HOME.tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:
Odin3 v3.09.exe
N900VVRUBMJE_N900VVZWMJE_N900VVRUBMJE_HOME.tar.md5
Disconnect the Galaxy Note 3 from PC if it is connected.
Boot your Verizon Galaxy Note 3 into Download Mode:
Power off your phone first and wait for 6-7 seconds after display is off
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy Note 3 as said above in ‘Before you begin..’ section.
If you have already installed driver, then uninstall them and re-install back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the firmware file (extracted in Step 2) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again.
FEEDBACK US!
Your suggestions and queries, if any, are most welcomed!
You're reading How To Unbrick Or Restore Verizon Galaxy Note 3 Sm
Latest Twrp Recovery For Galaxy Note 3 Sm
You’ll be happy to know that the latest Exynos processor powered Galaxy Note 3 has recently received the latest version of TWRP Recovery. The latest version not only brings new features but also promises to be void of the recovery in-compatibility issue with KitKat ROMs, which was due to ‘set metadata recursive’ error.
Yes, now all Android 4.4 ROMs like CyanogenMod 11, OmniRom, SlimKat, etc will work just fine without returning the troubling ‘set metadata recursive’ error.
At the time of posting, the latest version of TWRP Recovery, for SM-N9000 variant of Galaxy Note 3, is 2.6.3.7.
WARNING!
Warranty may be void of your device if you follow the procedures given on this page!
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N900 or SM-N9000!
Please know that this page is meant only for Samsung Galaxy Note 3, model no. SM-N900 or SM-N9000. Please DO NOT try the procedures given here on other variants of the Galaxy Note 3: SM-N9005/SM-N900W8, or the Note 3 sets at T-Mobile, Sprint, and others who have different model no.
BEFORE YOU BEGIN..
You must do this pre-installation stuff before attempting to install TWRP Recovery on your International (Exynos) Galaxy Note 3 in order to avoid any complications later, and have a smooth and successful process.
BACK UP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on sd card, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
INSTALL GALAXY NOTE 3 DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully flash TWRP Recovery on your Samsung Galaxy Note 3. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Note 3 on your computer.
► SAMSUNG GALAXY NOTE 3 DRIVERS INSTALLATION GUIDE
CHARGE YOUR DEVICESIf your android device, or PC, powers off due to lack of battery while the process is underway, it could damage the device.
So, make sure both of them are adequately charged and that no power interruption takes place when the process is undergoing — at least 50% battery of the device and laptop is what we would recommend.
OTHER THINGS TO TAKE CARE OF:└ Use original USB cable to connect your phone to PC.
└ Do not use the procedures given below on Mac (using VMWare) as it works best on proper Windows PC only.
EXAMPLE VIDEO
If you haven’t used Odin software to install a recovery on a Samsung galaxy device before, we suggest you first watch a video of that, given right below, to get familiar with the process.
Btw, the video below shows installing the the CWM recovery on Samsung Galaxy S3 (not Note 3), but as the process is exactly same, it doesn’t matter.
GUIDE: SAMSUNG GALAXY NOTE 3 TWRP RECOVERY
DOWNLOADS
Download the file given below and save them in a separate folder on your computer (just to keep things tidy, that is).
File name: samsung-galaxy-note-3-smn9000-twrp-odin.zip (9.1 MB)
STEP-BY-STEP GUIDE
Extract/Unzip the TWRP Recovery file, samsung-galaxy-note-3-smn9000-twrp-odin.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:
Odin3 v3.09.exe
Odin3.ini
openrecovery-twrp-2.6.3.7-ha3g.img.tar
Disconnect the Galaxy Note 3 from PC if it is connected.
Power off your phone first and wait for 6-7 seconds after display is off.
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.
If you don’t get the Added! message, here are some
troubleshooting tips
:
Make sure you have installed driver for Galaxy Note 3 as said above in ‘Before you begin..’ section.
If you have already installed driver, then uninstall them and reinstall back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the recovery file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the RESET in Odin’s top left box, that a problem. Try this now: disconnect your Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
FEEDBACK US!
It was easy, right? Let us know what you plan to do now, with latest TWRP Recovery installed. Looking to install Android 4.4 KitKat maybe, eh?
Suggestions are most welcomed!
Root Galaxy Note 4 Sm
The Galaxy Note 4 is huge on demand that Samsung just delayed the release in UK to Oct 17th, 2014, but that hasn’t stopped legendary developer Chainfire from rooting the Galaxy Note 4. Chainfire has successfully rooted the Note 4 with the CF Auto Root package that he has been releasing for almost all Samsung Galaxy devices since the last 4 years.
The Samsung Galaxy Note 4 SM-N910C runs on Samsung’s own Exynos5 chipset. The processor is great on performance but doesn’t support LTE bands. And hence, the Exynos5 processor doesn’t comes on Note 4 devices in the US and other LTE supported carriers which usually lock the bootloader on their devices so they can’t be rooted. But since the SM-N910C is comes with unlocked bootloader, it was only a matter of minutes for Chainfire to root the SM-N910C Galaxy Note 4 variant.
Chainfire’s CF Auto Root works for most Samsung devices, and the Galaxy Note 4 root has also been achieved using the same root package. CF Auto Root uses Chainfire’s own SuperSU app to manage Superuser permissions for root access to apps and ADB.
So withour any further ado, let’s get to the rooting instructions for Galaxy Note 4 SM-N910C. Make sure you follow the instructions word-to-word for fail-proof Galaxy Note 4 root.
Contents show
WARNING!
GUIDE: ROOT GALAXY NOTE 4 SM-N910C
STEP 0: CHECK DEVICE MODEL NO.
STEP 1: BACKUP YOUR DEVICE
STEP 2: INSTALL LATEST DRIVER
STEP 3: INSTALLATION INSTRUCTIONS
ROOT PACKAGE INFOName
Warranty Void Warranty.
Stability Stable Without Any Issues
Root Manager App SuperSU. It manages root permissions for apps on the device.
Credits Chainfire.
WARNING!Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
GUIDE: ROOT GALAXY NOTE 4 SM-N910CBefore you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N910C!
This guide is specifically for the Samsung Galaxy Note 4 with model no. SM-N910C. Do not use the procedures discussed here on any other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully root your Galaxy Note 4. If you are not sure, check the link below.
► SAMSUNG GALAXY NOTE 4 DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS DOWNLOADSDownload the CF Auto Root file given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).
CF AUTO ROOT FILE STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after rooting, which might delete internal sd card too, your files will remain safe on PC.
Extract/Unzip the CF-Auto-Root file, CF-Auto-Root-trelte-treltexx-smn910c.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:
CF-Auto-Root-trelte-treltexx-smn910c.tar.md5
Odin3-v3.07.exe
Odin3.ini
tmax.dll
zlib.dll
Disconnect the Galaxy Note 4 from PC if it is connected.
Boot your Galaxy Note 4 into Download Mode:
Power off your phone first and wait for 6-7 seconds after display is off.
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy Note 4 as said above.
If you have already installed driver, then uninstall them and reinstall back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the recovery file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the RESET or PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
NOTE: It may happen that your phone doesn’t automatically boot into recovery and root your phone. In that case follow the following above procedure except that in Step 7, Auto Reboot option is un-checked and then the instructions below:
Pull out the battery and re-insert it.
Boot your Galaxy Note 4 into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home.
Now, this will start the rooting process and will reboot the phone automatically when the process is done.
Feedback Us!It was easy to root Galaxy Note 4 SM-N910C using CF-Auto-Root, right? Let us know how you plan to use root privileges on your Galaxy Note 4 now.
Suggestions are most welcomed!
N900Vvrucnc4: Verizon Galaxy Note 3 Android 4.4.2 Kitkat Finally Arrives
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
FLASH FIRMWARES ON SAMSUNG DEVICES USING ODIN
Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: BACKUP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 1: INSTALL LATEST DRIVER
You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Samsung device.
In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.
► SAMSUNG GALAXY NOTE 3 DRIVERS INSTALLATION GUIDE
STEP 2: INSTALLATION INSTRUCTIONS
DOWNLOADSDownload the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.
ODIN ZIP FILEicon-file-o
FIRMWARE ZIP FILE STEP-BY-STEP GUIDE
Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might delete internal sd card too, your files will remain safe on PC.
Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe
Extract/Unzip the Firmware zip file, N900VVRUCNC4_N900VVZWCNC4_VZW.zip on your computer (using 7-zip free software, preferably) to get this file: N900VVRUCNC4_N900VVZWCNC4_
N900VVRUCNC4
_HOME.tar.md5
Move the friwmare file, tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:
Odin3 v3.09.exe
N900VVRUCNC4_N900VVZWCNC4_
N900VVRUCNC4
_HOME.tar.md5
Disconnect the Galaxy Note 3 from PC if it is connected.
Boot your Samsung Galaxy Note 3 into Download Mode:
Power off your phone first and wait for 6-7 seconds after display is off
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home
For further help on download mode, check our post on How to Boot into Galaxy Note 3 Download Mode.
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy Note 3 as said above in ‘Before you begin..’ section.
If you have already installed driver, then uninstall them and reinstall back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the firmware file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
FEEDBACK US!
Your suggestions and queries, if any, are most welcomed!
How To Factory Reset Or Hard Reset Samsung Galaxy Note 3
You may want to Factory Reset (aka Hard Reset) your Galaxy Note 3 in case you are looking to hand it over to someone else, or are simply selling it, and wanna remove all you apps, data, contacts, etc. from it.
Or, you have forgotten the password on the lock screen, and now are looking at the way to use your Galaxy Note 3 again.
Or, it could be that you were doing some sort of little hacks (you know, root, recovery, boot animations, etc. stuff) and now the Galaxy Note 3 isn’t booting up at all.
Or, maybe, some malware has made its way into your GalaxyNote 3, causing all sorts of trouble, Or maybe some bad apps.
Either way, the Hard Reset should only help you.
Here’s how to perform a Hard Reset on your Galaxy Note 3, which is actually very simple.
→ By the way, this works on all Samsung Galaxy Note 3 handsets around the world, whether that be international one, or at any carrier in USA or elsewhere. So, no problem as regards model no.
FACTORY RESET (aka HARD RESET) and FORMAT the SAMSUNG GALAXY NOTE 3
There are two ways to do it:
Using Settings itself: If you can Power On your Galaxy Note 3 and are able to use it, this is the easiest and best option.
Using Hardware keys. We use combination of keys to enter special mode for the factory reset and do it from there. Works even when phone isn’t working. Volume keys and Power key mus not be damaged.
But be sure to back up important data first, as mentioned below.
MAKE SURE YOU BACK UP IMPORTANT DATABe sure to backup all important data, contacts, music and video files, other files and folders and everything important before doing a Factory Reset so that you aren’t left with regret just 5 mins later. Use our backup guidelinked below.
Moreover, you can backup your Apps and their data too (game progress, app settings, etc.), without Root access, using Helium Android App.
1. Doing a Factory Reset using Settings (if phone IS working and you CAN use it)
Follow these simple steps to Hard Reset Galaxy Note 3 from Settings.
Go to Settings, and locate the option Backup and reset.
Now, tap on Factory Data Reset.
It will list all the details in very brief. Now, tap on the Reset device to start the Hard Reset on your Galaxy Note 3.
That’s it. Before you finish your coffee, you Galaxy Note 3 will be all formatted and will boot up as a new one, just like you first took it out of the box. Updates will remain, though, of course.
2. Doing a Factory Reset using Hardware Buttons (if phone IS NOT working and you CANNOT use it).
Follow these simple steps to enter recovery mode and Hard Reset your Galaxy Note 3.
To perform a hard reset on Samsung Galaxy Note 3, you need to do this:
Disconnect your device from PC and then power off your device. Wait for 4-5 seconds after screen goes off. If you can’t power off using power key, then remove battery and place it back after few seconds.
Press and hold these 3 buttons together, Volume Up + Home + Power, until you see Samsung’s logo.
→ In recovery, use Volume buttons to browse up and down between the options and Home/Power button to select an option.
Move to the option, wipe data/factory reset option and then select it using the Power button.
On next screen, move to ‘Yes — delete all user data’ option and select it, to confirm the data wipe/factory reset of your Samsung Galaxy device.
Hard Reset will start and will wipe all your data from the device, and once the format is complete, you’ll be back into recovery.
Move to option ‘reboot system now’ and select it to reboot your device.
Done. That’s all.
It was easy, no?
Samsung Galaxy Note 3 Review
Unlike the Samsung Galaxy Note II, the Galaxy Note 3 works with a body that’s divergent from the model set by the hero smartphone Galaxy S. In this case, that means that though the Samsung Galaxy S 4 works with a set of edges that are rather similar to that of the Galaxy S III, and last year’s Galaxy Note looked like a large version of last year’s Galaxy S, the Galaxy S 4 and the Galaxy Note 3 at last look to be forging their own unique hardware paths.
The Galaxy Note 3 works with 1080 x 1920 pixels across its 5.7-inch Super AMOLED display face, coming in at a cool 386 pixels per inch in sharpness. This is the same amount of pixels as the Galaxy S 4, but spread over a larger face, therefor resulting in a slightly less sharp (though barely to the human eye) yet just as brilliant panel.
As this device works with a lightly textured back panel with faux-stitching and plastic rim with several thin ridges, you’ll find a slightly more hearty feel than the Galaxy S 4. While the Galaxy S 4 remains almost surprisingly plastic-y in practice, the Galaxy Note 3 makes up a lot of ground with what feels like a more unique approach around the rear and rims. The additional weight in the Note also makes the whole device seem more substantial – in other words: this is not a toy.
The S Pen too has found itself refurbished. This pen still fits in nicely under the back rim down below the smartphone, here able to do so facing front or back – no more fumbling to figure the right way to slot it back in to place with this third generation. In practice, on the other hand, you’ll find the Galaxy Note 3’s S Pen to be largely the same in size and feel to the unit in the Galaxy Note II – if you loved it then, you’ll love it now, and vice versa.
This machine doesn’t feel any more massive than the previous generation – in fact it feels a lot better filled-out due to the slightly larger display real-estate up front vs the amount of space not taken up by screen. Like previous generations, you’re really going to need to know what you’re getting into with this Galaxy Note – this is a massive device for a normal user’s pocket, no matter how you spin it.
The Samsung Galaxy Gear does a lot to rectify the oddity in checking your notifications, text messages, and even making phone calls with its wrist-based syncing with the Galaxy Note. While you’ll have to head to our full Samsung Galaxy Gear Review to see our in-depth judgement of this smartwatch, this much is true: not having to pull the Galaxy Note 3 from your pocket every time you get an email is a big improvement over past generations – especially if you’re the sort of person that can’t deny the draw of the beast but feel awkward having it make an appearance on the subway.
If you’ve used past generations of Galaxy Note, you’ll be glad to find the performance on this generation to be better than ever. This is due in a large way to the Qualcomm Snapdragon 800 quad-core processor (we’re reviewing the T-Mobile USA edition of the phone here, if you did not already notice) and the 3GB of RAM under the hood to more processing power than you’ll know what to do with.
While you’re inside you’ll also notice a 3200 mAh battery (removable) and a microSD card slot able to roll with up to 64GB of extra storage space. This is in addition to the already hefty 32 or 64GB of internal storage space the Galaxy Note 3 comes with.
Update the detailed information about How To Unbrick Or Restore Verizon Galaxy Note 3 Sm on the Moimoishop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!