Trending December 2023 # Iphone Keeps Restarting? Try These 10 Fixes # Suggested January 2024 # Top 13 Popular

You are reading the article Iphone Keeps Restarting? Try These 10 Fixes updated in December 2023 on the website Moimoishop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Iphone Keeps Restarting? Try These 10 Fixes

When your iPhone keeps restarting over and over again, the whole iOS experience seems to get stuck in a boot loop.

Been there, done that. I can feel the agony you’re going through right now. Enough of the random boot loop, it’s time to look for fixes and take control of the unexpected restarts your iPhone is going through.

Why does my iPhone keep restarting itself?

From what I’ve experienced, a software bug is usually the force behind an iPhone that keeps restarting. But that doesn’t mean other culprits like problematic apps or cluttered storage aren’t responsible for the chaos.

Third-party malicious certifications and faulty chargers that cause an iPhone to restart itself while charging are also usual suspects.

What to do if your iPhone keeps restarting itself

Now that you know what could be behind the issue, you may be asking: So how do I fix an iPhone that keeps restarting? Well, these solutions have you covered:

1. Force restart iPhone

Once in a while, a random glitch tends to sneak in and begins to cause problems. When that happens, a hard reset comes to the rescue more often than not.

So, if your iPhone is stuck in a restart loop, the first thing you should try is to go for the force restart.

Did your iPhone start rebooting repeatedly after an iOS update? If so, this issue could very well be due to a software bug. The right way to troubleshoot it is to go for a software update.

Open Settings → General → Software Update. Now, follow the usual process to download and install the software update.

3. Remove the SIM card and reinsert it

Phones tend to get stuck in a restart loop if the device’s connection to the wireless carrier is facing a problem. Thankfully, one of the easiest and most reliable ways to fix this connection issue is just by removing the SIM card and putting it back inside.

First, shut down your iPhone. After that, use the ejector tool (or a safety pin), which comes with the iPhone in the box, to pop out the SIM tray. Remove the SIM card. After that, wait a few seconds and then reinsert the SIM.

4. Determine if an app is causing your iPhone to restart

If the problem continues even after a software update, track down the problematic apps and remove them. So, how do you figure out which apps are behind this issue?

Well, iOS comes with a feature called “Analytics” that works effectively in diagnosing issues. After a thorough test, it digs out the problematic areas, making it a little easier for you to find out the culprits.

Go to Settings → Privacy → Analytics & Improvements → Analytics Data.

Now, scroll through the entire list and spot the apps that might have been listed repeatedly. Once you have discovered those apps, removing them from your device could solve the issue.

Outdated apps tend to create a lot of problems. They can affect the overall performance of the device, and even cause your iPhone to crash unexpectedly. So, if your device has some apps that haven’t received love from the developers in some time, make sure to wipe them out

On iOS 13 or later

In iOS 13 or later, there are multiple ways to delete an app. One of the easiest ways is to touch and hold an app and then tap Delete App in the popup that appears. After that, tap Delete again to confirm the action.

On iOS 12 or earlier

Simply touch and hold an app and then hit the X bubble. Next, hit the Delete bubble in the popup menu to finish.

You can also update apps manually as and when you want. To get it done, head into App Store → Your Profile → Tap Update All to update all the apps installed on your iPhone in one go.

7. Clean up your iPhone

If your iPhone is still restarting, cleaning up the entire device may help in fixing the problem.

Corrupt files or cluttered storage could be at the heart of this issue. But before going on this marathon of a cleanup, don’t forget to back up all of your important files.

To help you track down all the storage-hogging files and delete them with ease, we’ve created a complete guide. So, hop on it to remove unnecessary files carefully.

Find the process of removing useless files manually a tedious affair? Check out these storage cleaning apps for iPhone.

Side Note:

While I can’t say with 100% certainty, clearing out RAM could help in taking control of this problem.

I also recommend that you delete any third-party certifications you may have installed on your device. Go to Settings → General → Profile & Device Management and delete the displayed certificates.

8. Reset all settings

Now we’re going to wipe out all the existing settings and set the device back to its default state. This solution may sound a bit radical, but it often proves handy in getting rid of common problems. So, let’s hope that it’s able to resolve the issue.

Head into Settings on your iPhone → General → Reset → Reset All Settings.

9. Check for a hardware problem

Dropping your phone a lot may also cause the iPhone to get stuck in the boot loop. If your device has recently met a nasty drop, there could be a hardware problem.

A worn-out battery may also be behind the problem. If it’s found to be the culprit, you can get rid of the issue just by replacing the faulty/worn-out battery.

If your iPhone keeps restarting while charging, make sure the Lightning port is clean. Pocket lint, dirt, and debris may have piled up over time, preventing the smartphone from charging. So, clean the lint and gunk stuck in the charging port and then try to charge the device. If the problem remains, try charging your device with another cable.

Though third-party services charge a lot less, Apple Support is more reliable. So, if you don’t mind spending a few extra bucks in favor of a trusted solution, contact Apple for help.

10. Restore your iPhone as new

Restoring an iPhone as new is something that I usually save for last as it’s known as a last resort when it comes to fixing software problems. It has a solid record of resolving stubborn issues like failed Wi-Fi and Bluetooth connectivity. I hope it succeeds in troubleshooting this problem as well.

But before going ahead with the following steps, don’t forget to back up all of your data as it will wipe out everything that your device has on it.

Now, check if the problem is gone. If it is, you’re good to go! But if it’s still there, try to restore your iPhone in Recovery Mode (check out this detailed guide.)

If it was a software issue, your iPhone should go back to normal after an update or a clean restore. In the event of a hardware problem, contacting Apple Support is always the right way to go for a reliable solution. Of course, Apple charges a lot more than third-party services, but when it comes to reliability, the first party solution always has the upper hand.

Iphone Touchscreen Not Working? Try These 6 Fixes

When the iPhone touchscreen is not working, it comes down to two fundamental reasons, hardware issues and software issues. If your phone had recently suffered fall damage or something similar, the pixels on your iPhone screen are most likely dead.

When this happens, the only solution is to visit a repair store as we can’t manually fix dead pixels. But, you can attempt to fix the touchscreen if software-related causes are more likely to be the cause.

Dead Pixels: You get anywhere from hundreds of thousands to several million touches on your touchscreen. After the expected lifetime ends or due to physical damage, it can cause dead pixels and the touchscreen stops working.

Static Charge Buildup: A static charge is when the negative and the positive charges are not in balance. Our phone screens to have a lot of static charge buildup due to environment changes or contact with items, like wool, hair, or aluminum foil. As a result, the touchscreen can stop working.

Water Damage and Corrosion: Corrosion is a result of water damage on your phone. This is when the internal hardware components on your phone slowly start to decay after not using the phone for a prolonged time. The touchscreen not working can simply be one of its symptoms.

Before we explore the solutions, we suggest trying out some basic fixes. Take off the screen protector. Then, clean the screen’s surface with a microfiber cloth to remove excess dirt off your phone screen. If you find some moisture or water droplets in any area of your phone, use a cotton swab to dry it.

Once you’ve made sure the screen is clean, we can proceed to test the touchscreen. We can now move on to other solutions:

One of the easy fixes you can try is rebooting your iPhone. This is because sometimes app or system bugs can lead to your touchscreen crashing or not responding. So, restarting your phone will reset all background processes and help fix minor glitches.

To force restart an iPhone without touching the screen, follow these steps.

From iPhone 8 to iPhone 14:

Hold and let go of the Volume Up button.

For iPhone 7:

Hold down the Volume Down key and the Power button together.

Let go of all the buttons.

For iPhone 6s:

Let go of both the buttons.

Along with rebooting your phone, you can also remove your SIM card, memory cards, and such. Doing so can help your phone to restart properly. Now, you can try and check if the touchscreen is starting to work again.

To remove any static charge buildup on your phone, you can simply use a humidifier in your room. It’s also best to always moisturize your hands gently before using your phone. However, make sure not to over-moisturize your hands. Another option to neutralize static charge on your phone is by using a product, like a static eliminator.

It’s a good idea to update the software on your phone to eliminate any bugs or glitches and fix the touchscreen error. You can directly use your Macbook to update your iOS version. Here’s how you can do it:

Connect iPhone to your Mac using a lightning cable.

Select your phone from the list.

Install any available updates.

If you’re using a Windows PC, you can use iTunes to update your iPhone.

Connect your iPhone to your PC using a USB cable and open iTunes.

If your phone’s touchscreen is not working, but you need to complete a task on your phone, you can still use voice commands. You can either say “Hey Siri” and say a command out loud, like “Set a reminder,” “Call someone,” or “play music.”

This method will require you to wipe all of your data. So, we recommend performing this step only if you already have a backup of your data or if no other solutions are working. You can easily restore your iOS using iTunes on a PC.

Launch iTunes and connect your iPhone to the PC. Usually, you’ll get a pop-up message to update your software right after opening iTunes.

Finally, if you’re still having issues fixing your touchscreen, it’s best to leave it to a professional. You can take your phone to any local repair center and diagnose the problem. You can also look up some repair services online if it’s more convenient for you.

Is Your Iphone Flashlight Greyed Out? Try These 9 Fixes

Being left in the dark sucks, but what sucks even more is finding your trusty iPhone (or iPad!) flashlight won’t turn on, and the flashlight icon in the Control Center is greyed out.

The good news is that your flashlight is probably okay; the bad news is that you may have to do some quick and dirty troubleshooting to get your light back. So sorry for those of you in a zombie apocalypse. But hey, at least you still have an internet connection!

Table of Contents

1. Reboot Your iPhone

Sometimes, when your phone’s flashlight is greyed out, it could be a temporary glitch caused by a minor software issue. Restarting your device can clear any bugs causing the problem and refresh the device.

On an iPhone, press and hold the Power button (also known as the Sleep/Wake button) until the Slide to power off slider appears on the screen. Then, slide the slider to the right to turn off your device.

Once your phone has fully shut down, press and hold the Power button again to turn it back on, and you’ll see the Apple logo appear.

2. Update to the Latest iOS Version

Keeping your phone’s software up to date is essential for security reasons and ensuring that all of its features (such as Bluetooth and Wi-Fi) are functioning correctly. Sometimes, your flashlight is greyed out because your phone’s software needs to be updated, and a bug is causing the issue.

If there is an available update, it will show up here. Follow the prompts to download and install the update for iOS or iPadOS. Depending on the update size and your internet connection speed, this process may take a few minutes or longer.

Use the flashlight again after the update is done. You can try other potential fixes to troubleshoot the problem if it’s still not working.

3. Reset the Settings on Your iPhone

Resetting your iPhone’s settings can help if your flashlight is greyed out because of a software issue. When you reset your settings, it will not delete any data but will return the settings to their defaults. This can help if a setting has changed from the default, causing an issue with the flashlight.

You will have several options from here, such as Reset All Settings or Reset Network Settings. Select the option that will best address the problem you’re experiencing with your flashlight. It’s always better to start with the Reset All Settings option.

It’s important to note that resetting the settings will remove any custom settings you’ve made, including custom ringtones, wallpaper, and other customizations. So you’ll need to redo those settings again.

4. Close Third-Party Apps That Use the Flash

Sometimes, your flashlight is greyed out because another app is currently using it. This can happen if you’re running an app that uses the flash, like a camera app, and then try to use the flashlight. In this case, the app currently using the flash will have priority, and the built-in flashlight will be greyed out.

Then, swipe left or right to find the app that’s using the flash, and swipe it up and off the top of the screen to close it.

5. Check for Camera Access Permissions

Sometimes, your flashlight is greyed out because the app you’re using doesn’t have permission to access the camera. Without access to the camera, the app won’t be able to turn on the flashlight.

To check if an app can access the camera, go to your phone’s settings app, then tap on

Privacy & Security.

Next, select

Camera.

Here, you’ll see a list of all the apps that have requested permission to access different parts of your phone, including the camera.

If you see an app that you want to use the flashlight with, but it doesn’t have permission to access the camera, toggle the switch to permit it.

It’s also good to check if the app is updated. Sometimes, an outdated app might not be compatible with the latest iOS/Android version, and the app might need to be fixed, or the flashlight feature might not work.

Once you’ve given the app permission to access the camera, try using the flashlight again.

6. Check for Low Battery and Disable Low Power Mode

Your phone’s battery may be running low, and your phone is in low power mode. In low power mode, your phone will conserve battery by disabling certain features, like the flash, to help prolong the battery life.

To check your phone’s battery level, look at the screen’s battery icon in the top right corner. If it’s low, try charging your phone. If you’re unable to charge it, try disabling low-power mode.

7. Try Using Siri to Turn On the flashlight

Another quick fix to try when your flashlight is greyed out is to ask Siri to turn it on. Siri is Apple’s virtual assistant that can help you perform various tasks, including turning on the flashlight.

To use Siri to turn on the flashlight, simply press and hold the Home button or say Hey Siri (if you’ve set it up) and say, “Turn on the flashlight.” Siri should respond by turning on the flashlight for you.

If Siri cannot turn on the flashlight, it could be due to a software issue. You may need to try other potential fixes to troubleshoot the problem.

8. Check Flashlight Settings in Control Center

Another quick fix to try when your flashlight is greyed out is to check the flashlight settings in the Control Center. The Control Center is a feature on iPhone that allows you to quickly access and control specific settings, such as the flashlight.

To access the Control Center, swipe down from the top right corner of the screen. Next, you should see the Flashlight button on the Control Center. If the button is greyed out, try tapping it to turn on the flashlight.

If the button is not greyed out, make sure the flashlight is set to on. Also, you can check the brightness level of the flashlight by long pressing the flashlight button in the Control Center.

9. Restore the Phone

Sometimes, you can’t fix a software issue through the above means. In this case, restoring your iPhone can help.

When you restore iPhones, it erases all of the data and settings on the device and returns it to its original factory settings. It’s the most definitive form of software system repair you can do for an iPhone, but it should be a last resort.

To restore your iPhone, you’ll need to connect it to a computer and use iTunes or iCloud to complete the process. Keep in mind that restoring your iPhone will erase all of the data, settings, and apps on your device, so back up any important data before restoring.

For detailed instructions on recovery mode, head over to How to Use DFU Mode on iPhone and iPad. The DFU mode also resolves issues resulting from faulty hardware and firmware programming.

After you have restored your iPhone, you can try to use the flashlight again. If the issue still persists, it might be a hardware issue, and you may need to contact Apple Support for further assistance. Especially if you suspect the LED flash itself is faulty.

Excel Filter Not Working? Try These Fixes

If you’re dealing with a rather large database, then the filter function on Excel can come in handy. This function allows you to sort the dataset according to your set conditions. As a result, it makes analyzing and summarising data much easier.

However, there might be instances where the filter function might not be working properly. Usually, such an error pops up when there are blank cells within the dataset. So, a quick fix to the issue is to delete these cells.

But, what if the issue persists? In this article, let’s learn more about the potential causes and the fixes for the filter function not working on Excel.

Why is My Excel Filter Not Working?

Here is a list of the potential causes of why the filter function might not be working in your Excel application.

Blank or Hidden Rows between the dataset

Vertical Merged Cells

Data Value Error

Selected more than one worksheet (grouped)

The worksheet is protected

How to Fix Excel Filter Not Working?

Now that we know have listed out the causes, let’s jump right in with applying the troubleshooting methods for this issue.

Select All Data From Sheet

If your dataset has blank rows or columns, it might not select the area (row or column) below or past these cells. As a result, Excel will fail to filter out all the data in your dataset.

Remove Blank Rows/Columns

Alternatively, you can also remove the blank rows by configuring the data on your Filter area. Here is how you can do so.

Unhide Rows or Columns

If you have hidden rows or columns on your dataset, then Excel won’t apply the Filter function on these data cells. You will have to unhide any hidden rows or columns from your sheet.

Here is how you can do it.

Unmerge Cells

Merged cells in your dataset can also create problems while you’re trying to filter your table. Excel tends to disregard the data on merged rows/columns. So, we suggest that you first unmerge all data cells before using the filter option.

Here is a step-by-step guide on how you can do it.

Remove Data Errors

If there are data errors in your table, then the filter function might not work on your data set. So, It is best to remove these data errors from the table.

Here is a step-by-step guide on how you can do it.

Clear and Add Filter

In some rare cases, the current filter you’re setting up might not work on your data set. So, a quick troubleshooting method you can apply is to clear the previous filter and set up a new one.

Here is how you can do it.

How to Fix Filter Grayed Out in Excel?

Here are a few effective methods you can apply when the filter option is grayed out on your Excel Application.

Ungroup Sheets Unprotect the Sheet

Another factor you should look out for is to check whether your sheet is protected or not. When you’re sheet is protected, Excel automatically greys out the Filter option. So, to unprotect the sheet,

Related Questions Why is my Filter by color not Working? How to fix Excel Not Grouping Dates in Filters?

In some instances, the grouping dates in filters might get disabled. So, here is a step-by-step guide on how you can enable it.

Teams Camera Not Working? Try These Fixes

Imagine getting suited up for a meeting, and your camera isn’t working; you really don’t want the effort to go in vain. The Teams app has been around for quite some time. This has given us enough time to understand why the camera may not be working.

Camera issues can be difficult, however, difficult to understand. The issue can range from being extremely general to specific, so the user may find the diagnosis process a bit tedious.

In this article, we will be listing the causes of why your Teams camera may malfunction and how you can fix it. Stick around to get your camera working in no time!

Before you jump to the fixes, skim through the causes and determine the cause most relevant to you. You can find the fixes for each mentioned cause under this article.

Here is a list of causes for why your Teams camera may not be working:

Inadequate Permissions

Webcam Used by Other App

Hardware Problems

Application Bugs

Outdated Teams App

Camera Driver Not Updated

Operating System Not Updated

You can test several solutions to fix the camera issue on Microsoft Teams. Below, we’ve listed both the general and specific solutions to the issue. After you’ve gone through the causes mentioned above, apply any of these fixes.

You can start your fix by running a simple test call to ensure that your camera hardware is working properly. If you determine that the issue is actually in your device, you can simply repair or replace your device. However, you can only use this feature if you own the paid desktop version of Microsoft Teams.

Follow these steps to run a test call in Microsoft Teams to check if your device camera is working properly:

Although the update is automatic for the desktop version of the Teams app; you need to update Teams on your mobile phones and tablets periodically. When you leave the Teams app outdated for a long time, it will fail to establish a connection with your device hardware.

You can visit Play Store to update your Teams app if you own an Android mobile or tablet. For iPhone or iPad users, update the Microsoft Teams app from App Store.

Drivers are essential to bridge the gap between hardware devices and the computer system. If you’re a Mac user, all your drivers are installed and updated automatically while you update your macOS. However, you can manually update drivers if you’re a Windows user.

You can update your camera driver from the device manager utility on your Window. Refer to the steps mentioned below to update camera drivers on Windows:

Your camera may not work because another application may be actively using your camera. This can be one of the more probable causes for why Teams may not be registering your video during a video conference call.

Make sure you close all windows that you believe may be using your camera. It’s best to close all applications running in the background. This applies to both the desktop application and mobile application versions of Teams.

On Windows

On Mac

Teams cannot access your camera if you haven’t granted the app the necessary permissions. To access devices like your camera and microphone, applications need special permissions for security reasons.

You can grant these permissions from the settings of your device. Using the Teams web version, you can find these permissions in the Site Settings. Refer to the steps mentioned below to grant camera access to the MS Teams application:

On Windows

On Mac

On Browser

If you have more than one webcam connected to your PC, Teams could be actually using the other peripherals. You need to switch the webcam in use from the device settings in the Teams application.

Here are the steps you can refer to while switching camera devices in MS Teams:

When some files go missing or corrupt in a program, certain functions in the application malfunction. It is possible that the problem is that the program files for your camera do not work like it should on the Teams app.

You can fix this issue by repairing or resetting the MS Teams application. Repairing the application will scan through the program files for any missing or corrupted files. Windows will replace the corrupted files with a new, functioning one. Similarly, it will add the missing files.

Resetting the application will do the same, except it will also erase all data from the application. This eliminated the chances of any bugs that may be interfering with the features in the Teams app.

This feature is only available in Windows. If you own a Windows and wish to repair or reset your application, follow these steps:

When you leave your operating system outdated for long, it will severely impact the system. The system fails to maintain a connection between the software and the hardware. Your camera may not be working because your system may have failed to establish communication with your camera.

You need to update your operating system periodically. When you update your system, it not only maintains your system’s functioning but also protects it from any security vulnerabilities. Additionally, updates generally push resolutions to bugs from the previous update.

Follow these steps to update the operating system on your device:

On Windows

On Mac

Displayport Not Detecting Monitor? Try These Fixes

If you are staring at a blank screen, your problem could be that DisplayPort is not detecting the monitor.

DisplayPort is a royalty-free digital display that supports 8k display at 120 Hz, GSync and Multi-stream Transport. Furthermore, it is backward compatible with other display interfaces, including VGA, DVI, and HDMI.

The other widely adopted display interface standard these days is HDMI. However, HDMI can only support 4k 30fps resolutions, and it doesn’t have support for GSync yet. Likewise, DP also supports Multi-stream Transport (MST), which allows you to connect multiple displays to a single DP port in your computer, whereas HDMI does not support this feature. Using DP over HDMI has started gaining traction in recent times, especially now that DisplayPort over USB C is becoming prevalent.

Sometimes, your DisplayPort connection to the monitor will not work due to bad cables, driver issues, etc. If you are having problems with DisplayPort not detecting your monitor, there are a few ways to troubleshoot this issue.

Bad Cable

Bad Drivers

Broken DisplayPort

Incorrect Refresh Rate

Firstly, we will assume that your monitor is not broken. If you are having unable to connect your PC with your monitor or television using the DisplayPort connection, we have the following fixes that you can try:

The first fix you should try is restarting your display driver. This method takes just one quick second, and if it fixes the problem then you won’t have to bother with any other solutions.

To restart your display driver, press Win + Ctrl + Shift + B. Your screen will go black for just a second, then resume – indicating that your display driver has restarted. Make sure that your monitor and device are connected via DisplayPort and check if this resolved the issue.

Sometimes it will transpire that the connection was not properly secured at all, when we were sure that we plugged in the cables properly. Make sure you have not made the same mistake.

Check the connection at both the device and monitor ends. Full-sized DisplayPort plugs have a latch that you can secure into the port, make sure this latch is securely deployed.

Unplug the cable from both the device and the monitor.

Plug it back into both ends, making sure that they are connected securely.

Check whether your monitor is displaying now.

Modern monitors and televisions come with many different input sources. Especially for the DP, since it’s a royalty-free format, manufacturers typically include two or more DPs in their devices.

Make sure that you have selected the correct display source on your monitor. If you have selected a DisplayPort as your source, but your monitor has multiple DP inputs, cycle through all available options (typically listed as DP1, DP2, …) until your monitor is displaying your device’s output.

Refer to your monitor’s Device Manual to correctly identify the ports for further clarity on the matter.

DisplayPort cable isolated on white

Perhaps it’s the DP cable that is faulty? If your DP cable is broken, damaged, or not authentic, it might be unable to transmit signals to your monitor properly.

To check if this is the case, get a different DP cable and use it instead. Make sure that the cable is plugged in securely at both ends and check if your monitor can display your device’s output now.

If the pins in the DisplayPort jack that connects the cable are bent or broken on either the monitor or your device, then they won’t be able to make a proper connection. Inspect the ports in both devices to make sure that this is not the case.

If you find damaged or broken DP ports in either device, contact your device manufacturer or an authorized repair center to get this fixed.

Note: If your device is a laptop, then you can use your laptop’s display. Otherwise you will need a second working display or a different connection to make sure you can enact the steps listed in the fixes below.

Your monitor will be capable of displaying output at a frequency of certain frames a second, called the refresh rate. This is specific to your device’s make and model, which you can find in the packaging box or device manual.

If your computer is set to a refresh rate that is vastly different from the refresh rate that is supported by your monitor, this could lead to problems with the DisplayPort not detecting the monitor.

Refer to your monitor’s device manual and set the refresh rate to match it from within the Display Settings in Windows:

Check if your monitor is displaying now.

A faulty display driver could be causing the issue with your DisplayPort. Try uninstalling the display driver and reinstalling it to see if this resolves the issue.

An outdated display driver can also lead you to have problems with the DisplayPort connection. Try updating your display driver to see if this resolves the problem.

You can either let Windows select the most up-to-date driver or alternatively, you can download the latest driver from your graphics card manufacturer yourself and point to the location of the driver. Once this is done, restart your computer.

If your DisplayPort connection was working previously but it stopped working suddenly after a display driver update, then rolling back the update to display driver will probably fix the issue.

If you’ve been through all the fixes above without success, as a last ditch effort, you should contact the manufacturer of your monitor. The problem might be hardware-related that cannot be troubleshooted by users. You can also enlist the help of an authorized repair shop.

DisplayPort cables can and do go bad. Well, not in the sense of fruits left overnight on the counter-top bad, but over time if you move your device around, the bends in the DisplayPort cable can lead to fray and disconnection. Repeated plugging and unplugging can also lead to damage to pins that could spell doom to your DisplayPort cable.

If you are having any of the following problems, then you should check to see if your DP cable is bad:

If you experience any of these issues, you should physically inspect your DP cable and ports.

Up to an extent, you get what you pay for. Or in this case, you could end up not getting what you did not pay for. Cheap display cables generally come with a plethora of problems, including the cables not working outright. This usually happens with knock-off brands of questionable repute.

That said, do a bit of research and see what most DP cables from decent manufacturers cost. There is absolutely no need to splurge on something that is vastly more expensive than an average cable.

DisplayPort is compatible with the HDMI standards, so you can connect the DP output from your PC to the HDMI-in port of your monitor using an adapter.

Update the detailed information about Iphone Keeps Restarting? Try These 10 Fixes on the Moimoishop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!