Trending November 2023 # Keyboard And Mouse Stop Working When A Usb Flash Drive Is Connected # Suggested December 2023 # Top 18 Popular

You are reading the article Keyboard And Mouse Stop Working When A Usb Flash Drive Is Connected updated in November 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Keyboard And Mouse Stop Working When A Usb Flash Drive Is Connected

In this post, we will describe possible solutions for the problem in which the keyboard and mouse stop working when a USB Flash Drive is connected. According to the feedback of affected users, their USB devices like keyboards, mice, etc., work fine until they connect a USB Flash Drive to their computers. The same thing happens with wireless peripherals.

USB keyboard & mouse stop working when USB Flash Drive is connected

If this issue occurs on your computer, the following solutions may help you:

Fix USB Root Hub via the Power Management settings.

Update or reinstall the USB Hub driver.

Reset the system BIOS to default.

1] Fix USB Root Hub via the Power Management settings

The Power Management feature helps reduce power consumption by placing the monitor and other peripherals into a low power mode after a certain period of inactivity. You can try to disable the Power Management feature for USB Root Hub and check if it helps. Some affected users have found this method useful.

Follow the steps listed below:

There, you will find an option, Allow the computer to turn off this device to save power. By default, this option is enabled. You have to disable it. For this, deselect the checkbox adjacent to it.

Restart your computer and see if it helps.

If you have multiple USB Root Hubs, repeat the steps explained above to disable the Power Management feature for each USB Root Hub.

2] Update or reinstall the USB Hub driver

If the above method did not help you, you can try updating or reinstalling the USB Hub driver. The following steps will help you with that:

Press Win + X keys and select Device Manager.

Expand the Universal Serial Bus controller node.

Now, select the Browse my computer for drivers option.

Select Generic USB Hub from the list.

When you are done, restart your computer and see whether the issue is fixed or not.

If the issue still persists, repeat the first three steps listed above and select the Uninstall device option. After uninstalling it, restart your computer. Windows will install the latest driver automatically on restart.

3] Reset the system BIOS to default

If none of the above methods helped you fix the problem, you can try resetting your system BIOS to default.

Wireless mouse and keyboard stop responding when a USB HDD or Flash Drive is connected

Many users have reported that they experienced the same problem with their wireless peripherals. The main cause of this problem with wireless devices is the interference issue with the USB 3.0 and 2.0 ports, which occurs when both the ports are located on the same side of the laptop. This interference issue causes a delayed response to wireless devices such as mice, keyboards, etc.

To solve this problem, it is suggested not to connect your USB 2.0 and 3.0 devices to the ports that are located on the same side. If your laptop has USB ports on both sides, connect your wireless peripherals and Flash Drive to the USB ports located on the opposite side.

Desktop users can connect the devices to front and back USB ports.

Hope this helps.

Related posts:

You're reading Keyboard And Mouse Stop Working When A Usb Flash Drive Is Connected

How To Add Or Remove Write Protection From A Usb Flash Drive.

If you have plugged in a USB flash drive and can’t seem to format it because of write protection, this guide will show you how to remove the write protection. You will also find out how to add write protection to prevent USB Flash drives being formatted easily.

How to Create, Merge, Shrink or Extend Partitions on Windows 10.

Sometimes when you connect a USB drive to your computer and start copying, moving, or deleting files you may receive an unusual The disk is write protected error. If you see this error it means that the drive has write protection and cannot be formatted using the standard procedure. Instead, you will need to manually remove the write protection in order to continue.


How Do You Find Out if a USB Drive Has Write Protection? Diskpart List Disk Select Disk


Attributes Disk

Once the commands finish, you will need to check the value next to Current Read-only State and Read-only If the value is Yes, it means write protection is enabled, if the value is No, write protection is disabled for the drive. Check the screenshot above for a better understanding. If you would like to change the write status of the USB drive, follow the steps in the below section.

How to Enable / Disable USB Write Protection on Windows.

Now that you know how to check if your drive does or doesn’t have write protection, we can begin the steps showing you how to change the write protection settings. The first thing you obviously need to do is connect the USB drive you want to change the write protection settings for to your computer. Once the drive is connected, open the Command Prompt tool once again in administrator mode. This time in the CMD window type the following commands, pressing Enter after each:

Diskpart List Disk Select Disk


To Disable write, delete, and format protection for the USB drive, type the following command and press Enter.

Attributes Disk Clear Readonly

To Enable write, delete, and format protection for the USB drive, type the following command and press Enter.

Attributes Disk Set Readonly

It’s important to remember that if you are wanting to enable write protection to prevent files from being deleted on your USB drive. It only works for the computer you enabled write protection on. Meaning if you connect the USB to another computer, write protection will be disabled.

Note: There are a few USB manufacturers that have hardware write protection, which will enable write protection for the drive no matter what computer you connect it to. You will need to check the specs for your USB drive on the manufacturer’s page to find out if you aren’t sure.

How To Enable Bluetooth Without A Keyboard Or Mouse On Mac

Have you ever found yourself in a situation where Bluetooth needs to be enabled on a Mac, but you don’t have a mouse or keyboard handy? This can pose a conundrum; in order to re-enable Bluetooth, you must use a Bluetooth mouse or keyboard… That may sound a little silly, but it’s a situation which can arise if you use a Bluetooth keyboard or Bluetooth mouse, and if Bluetooth gets disabled somehow. Since most desktop Mac usage scenarios utilize Bluetooth hardware, it’s not as rare as it may sound, and it can be challenging to enable the Bluetooth service and thus regain access to input devices on the Mac.

We’re going to show you how to tackle that situation in Mac OS, so that you can enable Bluetooth even if you can’t connect a Bluetooth mouse or Bluetooth keyboard to the computer to do so.

Keep in mind this is not a general Bluetooth troubleshooting guide, it’s aimed specifically at users who find the Bluetooth service to be disabled and they are therefore unable to use a Bluetooth keyboard or mouse on their Mac. If you need general Bluetooth troubleshooting steps, start with replacing the batteries of the devices, reset the Bluetooth hardware on Mac, and some other tips for resolving Bluetooth Not Available errors.

Also, remember that the latest Apple Magic Mouse 2 and Apple Wireless Keyboard 2 models both have a USB lightning port on them, which means they can be plugged in directly to the Mac to get around such a problem.

Enable Bluetooth on Mac Without Mouse/Keyboard with Siri

Before anything else, if you have Hey Siri enabled on the Mac, there’s a super simple solution; you can say “Hey Siri, turn on Bluetooth”.

Bluetooth immediately turns on, and the mouse and/or keyboard should connect to the Mac momentarily.

Of course not everyone has Hey Siri enabled, so proceed with the other tips if so.

How to Enable Bluetooth on Mac Without a Mouse in Mac OS X

This demonstrates how to enable Bluetooth if you only can connect a keyboard to a Mac. This is common if your Mac uses a Bluetooth mouse or trackpad and somehow Bluetooth is disabled, where it can be extra challenging to get the service turned on again. Fortunately as long as you have a keyboard handy (USB or otherwise), plug it in and you can enable Bluetooth with just that keyboard by following these instructions:

Connect a USB keyboard to the Mac (or use the built-in keyboard on a MacBook laptop)

Hit Command+Spacebar to bring up Spotlight, then type in “Bluetooth File Exchange” and hit the Return key

This launches the Bluetooth File Exchange app, which will immediately recognize that Bluetooth is turned off, simply hit the “Return” key again to choose the “Turn Bluetooth On” button

Once Bluetooth is enabled, quit out of Bluetooth File Exchange app

You can also navigate to and through the Bluetooth settings with just the keyboard, but that’s quite a bit more complex than simply searching for the app which triggers the service enabler directly.

How to Enable Bluetooth Without a Keyboard in Mac OS X

Enabling Bluetooth when you don’t have a USB keyboard is easy since you can just use any USB Mouse or USB trackpad as usual to enable the service with the cursor:

Pull down the Bluetooth menu item in Mac OS X and choose “Turn Bluetooth On”

Simple, right?

If the Bluetooth menu item is also disabled, simply go to the  Apple menu, choose System Preferences, Bluetooth, and turn the Bluetooth service on from there with the mouse.

Once Bluetooth has been enabled with the mouse, you can connect the Bluetooth keyboard as usual, along with any other devices.

How to Enable Bluetooth Without a Keyboard or Mouse in Mac OS X

This is a trickier situation, which is usually encountered if there is no USB keyboard or USB mouse available, and both the mouse and keyboard are Bluetooth instead. It’s usually iMac, Mac Mini, and Mac Pro users who encounter this experience, in which case the following steps are necessary:

First thing first, be sure the Bluetooth keyboard and Bluetooth mouse have sufficient battery power and are turned on

Disconnect all physical devices from the Mac, including any peripherals and anything except the power cable

Reboot the Mac (or boot the Mac if it was shut down) using the physical hardware button located on the machine (it’s usually on the back on modern Macs)

This will trigger the Bluetooth setup wizard and detect the Bluetooth devices and enable the service automatically, assuming they are within range and sufficiently charged

If for some reason the bluetooth setup wizard doesn’t trigger and the Mac boots up again with Bluetooth disabled, you’ll probably want to get your hands on either a USB mouse or USB keyboard and refer to the methods outlined above to enable Bluetooth with either just a mouse, or just a keyboard.


How To Create A Macos Mojave 10.14 Installer On A Usb Drive

In this guide we’ll go through how to create an install drive from the macOS Mojave 10.14 application, either general release or beta. This will allow you to perform clean installs, install to multiple machines without re-downloading, boot the system externally for troubleshooting, and more. 

How to create a macOS Mojave installer

1) If you don’t already have the Install macOS Mojave application, download it via the Mac App Store.

If you require a beta seed, you’ll need to install the Beta Access Utility before beginning, which can be downloaded from the Apple Developer portal, or the Public Beta webpage. Users creating a USB from the general release do not need to do this.

2) When the download completes, your Mac will launch it. Quit the installer, and instead locate it in your /Applications folder. If you’d already placed it somewhere else on your computer, move it back to the Applications folder. It’s also simpler to leave the file name as is: Install macOS

(Beta users should leave the file name as Install macOS Mojave

4) To make this guide a little easier, name the finished USB drive USB.

5) Now open up a Terminal session and paste in the following command:

sudo /Applications/Install macOS chúng tôi --volume /Volumes/USB --nointeraction --downloadassets

This will use the Mojave application to create an installer on your chosen drive.

If you’re creating an install USB from either the Public or Developer Beta, and not from the general release, use the command below instead:

sudo /Applications/Install macOS Mojave chúng tôi --volume /Volumes/USB --nointeraction --downloadassets

If you would like to be asked for confirmation before erasing the drive, remove “–nointeraction” from the above command.

Previous versions of macOS used an “–applicationpath” flag in this command. That flag is now deprecated and will throw an error if used. For this reason, use the above command instead of updating the command quoted in guides written for older versions of macOS.

6) Enter your administrator password when prompted.

When the files are transferred and the drive has been blessed it will be remounted on the desktop, as shown above, and Terminal will read out as complete.

How to use the macOS Mojave USB installer

1) Shut down your Mac with the USB drive inserted.

2) Start up the computer whilst holding the Option (⌥) key.

3) Select the drive called “Install macOS Mojave Beta” from the Startup Manager using the keyboard arrow keys. The computer will now boot from the selected drive.

4) You can now deploy Mojave as necessary. Using this external USB installer lets you reformat and/or repartition the startup drive and other storage devices. You can also access built-in tools such as Terminal, Startup Disk, and Firmware Password Utility from the menus.

Have fun with the OS! Although not without bugs, I’ve found it relatively stable, and certainly more attractive than High Sierra was.

If you don’t need it for other purposes, you can store your new USB installer in a safe place. If your Mac gets into trouble and can’t start up to Recovery Mode, boot from the USB drive and troubleshoot the issue, by reinstalling the operating system or leveraging tools like Terminal. You’ll also be able to install Mojave to your other Macs without having to download a new copy of the installer from the Mac App Store every time.

Surface Keyboard Not Working

If your Surface keyboard or Type Cover is not working, follow these troubleshooting tips to eliminate the issue. There could be several reasons why Surface’s keyboard may stop working or respond slowly. To get your Surface keyword to work, you can reattach the keyboard & update the firmware. No matter which generation of Surface you are using, the solutions are more or less the same.

Surface Keyboard not working

If your Surface Keyboard is not working but your Touchpad or Mouse does, maybe after an Update, here are suggestions to help you fix the issue.

Detach and reattach the keyboard

Force restart Surface

Install available updates

Submit repair request

To learn more about these solutions, continue reading.

1] Detach and reattach the keyboard

It is the most working solution that you can use to get rid of the problem. No matter which Surface you use, this solution works on all of them. At times, your Surface may lag, and that could cause the issue while typing anything using the keyboard or Type Cover. That is why you can detach your keyboard and reattach it. It is like a reset or restart for the keyboard.

Read: Fix Surface Book detach or attach problems

2] Force restart Surface

At times, your Surface may stop working when there is a lack of resources. In such situations, you cannot do anything on your Surface. Whether you want to browse the internet, watch a movie, edit a video, or anything else, you cannot do anything on your device. That is why you need to force restart your device.

The process to restart your Surface may vary depending on the version. For example, if you use Surface Pro 5 or later, Surface Go, Surface Studio, or Surface Book 2 or later, you need to press and hold the Power button until it shuts down and restarts. For your information, it may take 20 seconds to start the restart process. You need to hold the button for that much time.

On the other hand, if you have Surface Pro 1, 2, 3, and 4 or Surface Book 1, Surface 2/3/RT, etc., you need to press and hold the Power button for almost 30 seconds. Then, press and hold the Volume Up and Power buttons together for 15 seconds.

Once done, your device will restart automatically.

Read: Surface Book doesn’t recognize Touchpad and Keyboard.

3] Install available updates

If you haven’t updated your device for a long time or installed any driver update, you need to follow this solution. Some modern apps may not work well with your Type Cover when the drivers are not updated. That is why you need to search for available Surface firmware updates and install them if there is any pending update.

4] Submit a repair request

If none of the solutions work for you, you must submit a repair request.

For that, visit the official website at chúng tôi and sign in to the Microsoft account you use on your Surface.

How do you fix an unresponsive keyboard on a Surface Pro?

To fix an unresponsive keyboard on a Surface Pro, you must detach and reattach your Type Cover first. Then, you can force restart your device. However, if those solutions do not work, you can install pending updates. Even if that doesn’t work, you need to submit a repair request.

I hope this guide helped you.

Read: Surface Pen Eraser not erasing or working properly.

How To Control Your Mouse Cursor With A Keyboard In Windows 10

There are myriad reasons why you may want to configure your keyboard to use as a mouse. Maybe you use a battery-powered wireless mouse, and it’s run out of charge, or your mouse has stopped working, and you need to make changes within Windows 10 to fix it … but you can’t because your mouse doesn’t work!

Perhaps more importantly, controlling the mouse with a keyboard can be helpful for people with mobility issues in their hands, as pressing keyboard keys is easier than zipping your hand across a desk.

Whatever your needs, we’re here to show you how to control your mouse with a keyboard in Windows 10.

Note: Linux users can check out this article to use Mouse keys in Ubuntu.

Control Your Mouse with a Keyboard

The keyboard mouse control feature is actually built into the “Ease of Access” settings in Windows 10. Go to the Window Settings app. (You can just type “settings” into the Start menu to find it quickly.)

You’ve now switched on “Mouse Keys.” By default, you need to have Num Lock active for this to work, at which point you can use the Num Pad at the right side of your keyboard to use Mouse Keys.

We recommend increasing the Pointer speed slider to maximum – otherwise the pointer is very slow. Ticking the “Hold the Ctrl key” box is also a good idea, as this lets you speed up and slow down the pointer speed using the Ctrl and Shift keys as modifiers.

Here are the numpad keys and their corresponding functions:

To move the mouse pointerPress

Up and to the left7


Up and to the right9



Down and to the left1


Down and to the right3


Speed up pointer movementHold Ctrl

Slow down pointer movementHold Shift

What If You Don’t Have a Numpad?

Not everyone’s lucky enough to have a numpad. The fact is that they’re not that frequently used, so many laptops and some standalone keyboards don’t include them.

Fear not, though, because you can get a third-party MouseKeys-type app that lets you set your own keys, and it’s overall much more robust than Windows Mouse Keys.

Enter NeatMouse. Using this lightweight app you can set whatever keys you want to act as mouse directions.

You can also change the key that activates the keyboard-as-mouse functionality, while the “Emulate only with” drop-down lets you set a button to hold in order for it to work.

You can even set multiple profiles using the green “+” icon, having different setups depending on what software you’re using and so on.


Some people don’t like installing third-party apps when they don’t have to, but if you want a more customizable and smooth way of emulating your mouse functionality to your keyboard, then we’d pick NeatMouse over Windows Mouse Keys. Other than giving you more control, the mouse pointer runs much more smoothly as well, where the Windows option can be a bit choppy.

It’s your call, though, and at least now you know you have options!

Robert Zak

Content Manager at Make Tech Easier. Enjoys Android, Windows, and tinkering with retro console emulation to breaking point.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

Update the detailed information about Keyboard And Mouse Stop Working When A Usb Flash Drive Is Connected on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!