You are reading the article Report Claims Radiofrequency Radiation Levels In Several Iphones Measures Higher Than Legal Limit updated in November 2023 on the website Moimoishop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Report Claims Radiofrequency Radiation Levels In Several Iphones Measures Higher Than Legal Limit
A newly-conducted test indicates that several different iPhone models released over the years actually surpass the regulatory safety limits when it comes to radiofrequency radiation levels. But Apple disputes the findings.
Both the report and the test were put together by The Chicago Tribune (via MacRumors). According to the publication, the test was conducted in an accredited lab and included several different phone models from various manufacturers. Each the phones were positioned under a clear liquid that was specifically created to simulate human tissue. Probes were then dropped into the liquid to test the radiofrequency radiation levels outputted by the devices.
With the push of a button, a robotic arm swung into action, sending a pencil-thin probe dipping into the tub. For 18 minutes, it repeatedly measured the amount of radiofrequency radiation the liquid was absorbing from the cellphone.
While various phones were tested, it’s the iPhone 7 that was called out for being the worst offender. Not only was the handset’s radiofrequency radiation levels over the safety limits, but they were actually double what Apple reported to federal regulators.
Still, while other iPhone models fell within the appropriate range –like the iPhone 8 Plus — the iPhone 7 did not. It was still above the legal limit.
Apple disputed not only the original test, but also the modified test. The company says that the publication did not test the phones in the same way that Apple does, and, as a result, the tests were not indicative of what the iPhone actually puts out.
Apple did not say how the tests differed, however.
Apple requested that The Chicago Tribune put forward questions in written form. Unfortunately Apple did not respond in time for publication, but did provide a follow-up, reiterating that the tests were inaccurate:
All iPhone models, including iPhone 7, are fully certified by the FCC and in every other country where iPhone is sold,” the statement said. “After careful review and subsequent validation of all iPhone models tested in the (Tribune) report, we confirmed we are in compliance and meet all applicable … exposure guidelines and limits.
For those curious, the iPhone X was only moderately above the acceptable range. The iPhone 8 managed to go over as well in some tests, while the iPhone 8 Plus stayed within the legal range.
Meanwhile, here’s the FCC’s statement on the matter, with the regulatory body moving forward with its own tests:
We take seriously any claims on non-compliance with the RF (radiofrequency) exposure standards and will be obtaining and testing the subject phones for compliance with FCC rules,” agency spokesman Neil Grace said.
Apple is not alone in this issue. Motorola, Vivo, and Samsung each had phones tested in the publication’s report. All of which had phones that went above the safety limit for radiofrequency radiation levels.
Now, there’s a catch worth mentioning here. Namely, that “consumers do not experience exposure like this”.
The phone was now operating at full power, creating what was essentially a worst-case scenario in terms of radiofrequency radiation exposure. Typically, Moulton said, consumers do not experience exposure like this. But it could happen, he said, in limited situations, such as someone talking continuously in an area with a weak connection.
So, there’s that.
Still, it will be interesting to see if anything comes from this. After The Chicago Tribune‘s report the FCC is going to conduct its own testing. Will there be repercussions for Apple (and the other companies) if their devices are found to actually exceed the safety limitations?
The full report is absolutely worth a read, so check it out.
You're reading Report Claims Radiofrequency Radiation Levels In Several Iphones Measures Higher Than Legal Limit
Why Is Renq Finance (Renq) Rated Higher Than Polygon (Matic) In The Longer Run?
In this article, we will compare two popular decentralized finance (DeFi) platforms: RenQ Finance (RENQ) and Polygon (MATIC). We will examine their features and strengths and see why RenQ Finance (RENQ) has a higher potential than Polygon (MATIC) in the long term.
Polygon (MATIC): A Scalable Solution for EthereumPolygon (MATIC) is a DeFi platform that aims to solve the scalability and interoperability issues of Ethereum. It offers a framework for building and connecting Ethereum-compatible blockchain networks. It supports various types of networks, such as standalone chains, side chains, plasma chains, and zk-rollups.
Polygon (MATIC) was launched in October 2023 as Matic Network and rebranded to Polygon (MATIC) in February 2023. The Polygon network offers many of the same features as the main Ethereum network but with costs that are frequently only a few hundredths of a penny. Try decentralized exchanges such as QuikSwap or SushiSwap, yield-generating loan and savings protocols such as Aave, NFT marketplaces such as OpenSea, or even “no-loss prize games” such as Pooltogether.
Polygon (MATIC) has a talented team with experience in blockchain development and engineering. It also has a large community of developers and users who support the platform’s growth and innovation. The platform’s native token is MATIC, which has a circulating supply of 6.3 billion tokens. MATIC holders can use the token to pay transaction fees, staking, and governance.
RenQ Finance (RENQ) Success Continues After Successful LaunchRenQ Finance (RENQ) was launched on Uniswap on May 22, 2023, having undergone a successful presale campaign. The project has also completed listings on centralized exchanges (CEXs), such as Lbank, Coinstore, and MEXC. Bitmart exchange has also confirmed a listing by May 26.
Moreover, the RenQ team has confirmed that RenQ Finance will list on a tier 1 crypto exchange soon. This is a huge accomplishment for RenQ Finance (RENQ). A tier 1 listing cements the project’s position as a key market player. Tier one crypto exchanges such as Binance and Coinbase have huge liquidity and a large number of daily users. As a result, this listing will benefit RENQ with exposure to a large user base, which will increase its trading and overall market value.
RenQ Finance (RENQ) has a strong team with a track record of success in the crypto industry. It also has established partnerships with other blockchain projects and service providers, such as Certik, Chainlink, Polygon (MATIC), Binance Smart Chain, and Solana. The platform’s governance token is RENQ, which has a total supply of 1 billion tokens. RENQ holders can participate in the decision-making process and benefit from the platform’s revenue.
Comparison: RenQ Finance (RENQ) vs Polygon (MATIC)RenQ Finance (RENQ) and Polygon (MATIC) are DeFi platforms that offer various benefits to their users. However, they also have some differences that make them suitable for different purposes and preferences.
RenQ Finance (RENQ) is rated higher than Polygon (MATIC) in the long run because it has more potential to capture a larger share of the DeFi market. RenQ Finance (RENQ) can offer users more options and possibilities by connecting all blockchains and providing a unified platform for all traders. RenQ Finance (RENQ) can also leverage its strong team, partnerships, listings, and governance to achieve further growth and success in the future.
Visit the links below for more information about RenQ Finance (RENQ):Stealing Iphones Is More Profitable Than Crack For San Francisco’s Pro Thieves
We’ve always held that the iPhone can be like a drug, its users addicted to just one more app, just one more high score. Now comes word from the horse’s mouth, so to speak: criminals. Theft of the iPhone and other cellphones is increasing in popularity with criminals who once sold crack cocaine.
Turns out, a new twist on iPhone thefts can be more profitable – let alone, less dangerous – than selling drugs on the street…
Despite a criminal being able to pawn a stolen iPhone for about $100, a new wrinkle nets thieves “more than I can get for selling crack cocaine,” San Francisco, California Police Chief Greg Suhr tells the San Francisco Examiner.
Instead of selling the stolen phone, thieves now act as Good Samaritans, giving back the handset they “found” to victims. The grateful owner usually gives the thief $20 for returning the valuable item, more than what Suhr said a drug dealer can earn from selling crack.
Indeed, the police chief believes a rise in cell phone thefts could explain a drop in that city’s drug-related arrests.
Along with the Good Samaritan ploy, which does an end-run around the need to sell a stolen iPhone, thieves are joining forces in ways that would make the Artful Dodger of ‘Oliver Twist’ proud.
San Francisco police say they’ve seen an increase in teams of thieves working together to steal cell phones from restaurant patrons or even bus passengers. In one instance, a man eating at Taco Bell had his phone swiped by a woman, who fled the store. When the victim tried to catch the thief, two accomplices blocked his way.
The thief was later captured by police.
The same trio attempted to grab a cellphone from a victim riding a city bus. Following a tactic more common on the NFL gridiron than the streets of San Francisco, the thief reportedly slapped the phone from the female victim’s hand.
While the victim was able to grab her phone off the floor before the criminals could reach it, police say the slapping movement is enough to startle a victim, giving the thief the upper hand.
Here’s an iPhone theft gone real bad as a security cam captures a teenager attempting to steal an iPhone 4 at an AT&T Store in Downtown Washington, DC.
All of this highlights several low-tech, but useful takeaways: don’t zone-out when talking on your phone. So often, people will carry on a conversation in public and not pay attention to their surroundings. Not only is this terribly annoying to people around you who have to put up with your insufferably boring talking, but it makes you vulnerable to theft.
Secondly, if your iPhone is valuable, don’t make it easy to steal. If you are a woman, put your phone in your purse, preferably in a zipped compartment. Also, think about adding a chain to your iPhone’s case.
As one former pickpocket told ABC recently, a cell phone is “the most frequently stolen item in the world today.”
Keep that in mind the next time you pull your iPhone out of your pocket in public.
Using Pinterest In Higher Education Marketing To Engage A Student Audience
Techniques and examples of using Pinterest to build a brand and connect with the student community
It’s no surprise – Pinterest drives an impressive amount of traffic. In fact, Pinterest is now 21% more popular than Twitter for US Internet users according to this Pew compilation of online US adults. This image discovery tool lets fans and influencers find and follow their favorite brands, whether it’s through products pinned from the website, or business pages created by brands.
Many brands, like Whole Foods, Etsy, and Kate Spade effectively use Pinterest to share information. The possibilities (and marketability) are truly endless.
Until recently, many universities did not have, or effectively use, Pinterest pages. The University of Michigan, often a risk-taker and thought leader among the Higher Ed social media community, saw an opportunity to utilize Pinterest in a unique way.
We wanted to connect with multiple audiences, both within Pinterest’s key demographic (80% women, 45% age 35-54), and our other audiences – high school and college students.
How did we connect via Pinterest?For starters – while it’s important to note the demographics of Pinterest, this makes up some, but not all users. We had success connecting with our alumni in this key demographic, through boards like True Blue Weddings and Maize & Blue DIY, but we wanted to expand. Men, teenagers, college students, and the 50+ crowd still use Pinterest. If this is your audience, don’t ignore them!
Here are a few ways the University of Michigan is using Pinterest to connect with multiple audiences.
1. Problem Solve
The Tour #UMich board, one of the two we created in our partnership with Pinterest for the launch of Place Pins, was created specifically with prospective students in mind.
Both our office of admissions and central accounts receive an incredible amount of questions from prospective students about the admissions process, student, and campus life. When Pinterest reached out to us about Place Pins, we immediately thought of solving this issue in a visual way. Now, international students can get a sense of our campus if they are unable to visit.
Here is an example of this solution in action. If we didn’t have this Place Board, this fan may have not opted to visit campus, as our tours are strictly for prospective students and parents, not necessarily fans just wanting to explore campus and see the highlights:
2. Tell a Story
While every brand has their popular topics (for universities, it’s may be athletics, popular quotes and tag lines, and mascots), storytelling can highlight and attract attention to other moments of pride.
World-class donors, innovative research, and top-rated programs make the University of Michigan truly different from others. Creating a visual collection of ’The Michigan Difference’ has attracted audiences from our world-class faculty and staff to professionals in the health and sciences communities.
3. Show what makes You, ‘You.’
Part of the University of Michigan’s legacy as a prestigious university is our history. Our university was founded in 1817, making us almost 200 years old. We are fortunate enough to have access to an extensive image bank from all parts of our history, and our followers LOVE to see these photos.
Historical photos are particularly popular among our alumni community, whether they’re trying to spot themselves in a photo, or recounting memories from their, or their parent’s time at the university.
Aside from being an excellent way to engage our fans, we’re heard a lot of great stories!
4. Provide Value
Our Student Resources board is one of the newest. Our university has an endless amount of resources, from the Sweetland Writing Center to the Career Center and the Alumni Association but why stop there? Allowing our students to see creative infographics and visual answers to tough questions they have throughout their time as a student (What do I do with my major? How do I find a job?) provides value to them, and ensures they will continue returning to our page.
Additionally, student-specific blogs help us reach the younger demographics.
5. Assess the Competition
We track our progress, and our competitors weekly, but for smaller brands with a slower-growing following, you may only need to track bi-weekly or monthly to get a sense of the growth.
Aside from showing where you stack up against your competitors, seeing these rankings week over week is addicting!
Overall, Pinterest has been a huge asset to the University of Michigan’s social presence. In the fall, we’re hoping to bring our Pinterest audience offline with on-campus events, and continue to connect with our incoming and current students. Stay up to date with our latest social stories on our website, and feel free to give us a follow on Pinterest.
How To Create A Parameter In Report Builder
In this tutorial, you’ll learn how to create a parameter in Report Builder. Parameters allow end users to interact with a paginated report.
Parameters are similar to filters but they are functional only when you’re in the run view of Report Builder. Adding in this feature offers great assistance to end users as it allows them to filter data corresponding to their needs.
This tutorial will cover a comprehensive discussion on everything related to parameters where you’ll learn how to add and remove parameters. The tutorial will also show you how to remove blank or null values from your report, and handle errors in Report Builder.
At the top part of the Query Designer, you can see a label called Parameters with two boxes for each Dimension.
When you run it, you’ll see that you need to select a city or cities before viewing the report.
In the resulting report, you’ll notice that even with the city selection, it’s still returning blank values. To remove blank values from your parameter, go back to the design view and open the Report Parameter Properties window.
The next step is crucial. If you don’t do this, you’ll get an error.
Go back to the Query Designer. If you want to remove blank or null values, you need to set the Operator to Equal and remove any filter expression.
You’ll then see that all the blank and null values from the table have been removed.
This is an explanation as to why editing the Query Designer when removing blanks is important. Let’s look at a scenario where you skip going back to Query Designer and instead run the report after only unchecking the Allow blank value and Allow null value options.
If you do this, you’ll be faced with an error message.
The error is saying that the AllowBlank property of the City parameter is false. However, the default value contains a value that violates the AllowBlank property condition. This means that there’s a contradiction in the City parameter’s properties.
Remember that in the Parameter Properties, you’ve already set it to not allow blank or null values. However, in the Query Designer, the current expression already sets the City to not equal blank values. Therefore, there’s a redundancy in the formatting.
Moreover, because you’re using City as a parameter, adding a filter expression is no longer needed. Error messages in Report Builder are built intuitively as they specify what’s happening.
They allow you to fix the mistake first before continuing with your work. So it’s always a best practice to routinely Run your report.
This ensures that errors get detected early on. Instead of revising everything when you’ve almost finished, you can approach errors one at a time.
If you want to add another parameter in your report, open Query Designer. Then, drag the item from the measure group to the dimension tab.
Before you run the report, you first need to check the new parameter’s properties. Edit any properties if needed.
When you run the report, you need to set the two properties.
You can also continue adjusting the parameters as you view the report.
The parameter has now been deleted from the report. When you run the query, you’ll only be filtering by Year. If, for example, you select 2023, the report will then only show values with 2023 as the year.
To efficiently remove blanks and null values from your report, you can use a Boolean expression.
For this example, you need to create a Boolean expression so that you can keep the rows with non-blank values.
This will return True if a row value is blank, and False if otherwise.
Then, instead of Text, choose Boolean. For the operator, use the equal sign ( = ). In the Value textbox, write false.
So behind the scenes, this filter first evaluates if a value is blank (true) or not (false). Then, it filters out values that return true.
If you run your report, you’ll see that it doesn’t anymore contain blank or null values.
You can use this both at a data set and Tablix level.
This tutorial offers a comprehensive discussion on parameters in Report Builder. This feature is especially beneficial for end users. It allows them to see specific details in a paginated report.
And as you’ve learned, adding and removing parameters is easy. The trick is to make sure the parameter properties are set correctly so that blank or null values will be excluded.
But even if you make a mistake, you’ll be notified through an error message. Overall, Report Builder is an easy and user-friendly program to use.
Sue Bayes
Motorola’s Edge 30 Ultra Pushes Specs To The Limit
Released in China as the Motorola X30 Pro last month, the Ultra sports a whopping 200Mp main camera lens in a claimed industry-first, flanked by a 60Mp front facing camera and a 50Mp ultra-wide.
There’s also a 12Mp portrait lens that lets you adjust the focal length between wide, standard, and close-up. The lens can also be used for 2x telephoto shots.
Also on the impressive specs list for the Edge 30 Ultra is the Qualcomm Snapdragon 8+ Gen 1, a 4,610mAh battery that charges at 125W wired and 50W wirelessly, up to 512GB storage, up to 12GB RAM, and a 6.67in OLED display with a 144Hz refresh rate.
We’re used to seeing 120Hz on the best phones you can get like the iPhone 14 Pro or Samsung Galaxy S22 Ultra, but 144Hz is usually reserved for top-spec gaming phones.
Motorola slapping it on the Edge 30 Ultra and asking for £749.99/€899.99 for it in the UK and Europe is an aggressive pricing move. As the Edge name suggests, the sides of the screen curve away at the edges.
In a small nit-pick, the phone is only IP52 dust and water resistant, but it can record 8K resolution video. Motorola has pretty much gone all out here.
The Motorola Edge 30 Ultra
Motorola
The rear of the phone is matt glass with a camera module housing those big megapixel sensors reminiscent of the design on the Xiaomi 12 Pro.
Many of these design features and specs have also been carried over to the Motorola Edge 30 Fusion, another phone also announced today (we’ll get to the Motorola Edge 30 Neo in a second).
The Edge 30 Fusion has a slightly smaller (but still huge) 6.55in OLED screen that also refreshes at 144Hz and a glass design with the same camera design language and central front facing camera cut-out.
To hit its £499.99/€599.99 price tag Motorola has shaved off the specs a little though, with a 50Mp main camera with optical image stabilisation (OIS) and can also record in 8K, 66W wired charging but no wireless charging, and the Snapdragon 888+ 5G. Like the Ultra, it’s also only IP52 dust and water certified.
The Motorola Edge 30 Fusion
Motorola
At £349.99/€349.99 the Motorola Edge 30 Neo is the cheapest of the three new phones, but it looks like no slouch. Its Snapdragon 695 5G chip is still one of the best mid-range phone options out there, while a 120Hz 6.28in OLED screen, 68W wired fast charging, and up to 8GB RAM and 256GB storage rounds off a strong specs sheet.
It’s also got a 64Mp main rear camera with OIS, a superb feature for the price. Motorola calls it ‘compact’ with a 6.28in screen, and it’s great to see it is a 120Hz OLED.
The company has teamed up to slap Pantone colours on the phones, and there’s a Pantone logo stamped on the back of each of the colours, which won’t be to everyone’s taste. You’ll be able to match the OS colours to them too.
It also packs in the Snapdragon 695 5G, the same solid chip as in the Edge 30 Fusion.
The four Motorola Edge 30 Neo colours
Motorola
These are a trio of promising from phones from Motorola, a company that if anything releases too many phones. But these look like its strongest three for a while, if only on paper.
They’ll be off paper soon – we hope to have full reviews very soon.
Update the detailed information about Report Claims Radiofrequency Radiation Levels In Several Iphones Measures Higher Than Legal Limit on the Moimoishop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!