You are reading the article Update Galaxy S2 With Leaked Xxkpa Android 4.0 Firmware updated in February 2024 on the website Moimoishop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Update Galaxy S2 With Leaked Xxkpa Android 4.0 Firmware
It’s here. Another unofficial Ice Cream Sandwich update for the Samsung Galaxy S II I9100. This time it’s XXKPA, a successor firmware to XXKP8 we covered a few days ago.
We know you are anxiously waiting for the official release of Ice Cream Sandwich, but until then, these leaked firmware are here to satisfy your hunger for tasting Ice Cream Sandwich on your Galaxy S II. So, read on to find out how to flash it on your phone.
Although XXKPA doesn’t differ much from the previous leak, XXKP8, it’s still said to run faster and overall better in terms of touchscreen response and feel. So, we can say, it’s the best Ice Cream Sandwich leak for Galaxy S2 so far.
The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to you or your device, we won’t be held liable — you only will be responsible, you’ve been warned!!!
This rom and the guide below is compatible only and only with Galaxy S2, model number i9100. It’s not compatible with any other device. Check your device’s model number in:Settings » About phone.
If you have Samsung’s PC software Kies installed, un-install it first because it may interrupt the flashing process.
Install XXKPA Firmware on Galaxy S2 to get Android 4.0 ICS
Extract the downloaded file ‘I9100XXKPA_I9100OXAKPA.rar’ of XXKPA firmware to get these 7 files (the file-names may end with .tar instead of md5 as the file extension is hidden, so don’t worry):
I9100_EFS_I9100XXKP9_CL45181_REV02_user_low_ship.tar.md5 [not to be used]
I9100_KERNEL_I9100XXKP9_CL45181_REV02_eng_mid_ship.tar.md5 [not to be used]
Disconnect your phone if it’s connected to PC. Switch Off your phone. Wait for vibration to confirm complete switch off.
Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume Down + Home + Power. You’ll get an options screen. Press Volume Up now to go to download mode (which is also called Odin mode). This is required to install the XXKPA (or any other firmware) using Odin PC Software.
Connect your phone to PC now. You should get the message “Added! !” under the Odin’s message box in the bottom left. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed. See point 3 above under ‘pre-installation tips’.
Select these files in Odin at respective tabs:
Important! On Odin, make sure Re-Partition, Auto Reboot and F. Reset Time check boxes are selected. Do not touch any other check box or tab or anything, except as was required in step 8 above.
Double check everything said in step 7 and 8 above. [And, do not use the files in step 2.3 and 2.4 anywhere in Odin]. This is my Odin’s screen while I flashed the XXKPA on my Galaxy S2 — your Odin’s window should look real similar to this:
Now, hit the START button to start flashing of XXKPA Android 4.0 firmware on your Galaxy S2. When the XXKPA Android 4.0 firmware has been installed by Odin on your phone, your phone will automatically reboot — and when you see the Samsung logo, you can safely unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. In case it says FAILS (with red background) or nothing seems to be happening, check the Important Note below after step 11 to know what to do.
When it has restarted, your Galaxy S2 will be running Ice Cream Sandwich (ICS) with version being Android 4.0.3, build being XXKPA and Samsung’s custom UI TouchWiz 4 atop it. Check out your Galaxy S2’s android version here: Settings » About Phone.
IMPORTANT NOTE: If Odin doesn’t seem to be progressing/doing anything for more than a minute, or fails to complete the process, do the following:
Disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 5.
(Optional, of course) If you found this guide useful, share it with others too on webpages, forums, your Facebook/twitter/Google+ pages, etc. That would be helping us grow too!
You're reading Update Galaxy S2 With Leaked Xxkpa Android 4.0 Firmware
After the leaks and official updates on Galaxy S4 (I9500 and I9505) and S3 (I9300), the Android 4.3 Update by Samsung for the Galaxy S3, model no. GT-I9300, has become available — I9300XXUGMJ9 is the build no.
This is leak firmware. And only a test build. it’s working good but not perfect — there may be (read: are) bugs present which should be fixed by Samsung upon final official update, which may happen in coming weeks. that said, it’s been under testing for some time now, and is said to be working all nice.
So, if you can wait for few weeks for Samsung to release the full and final official Android 4.3 Jelly Bean update for the Galaxy S3, you may wait. but if you can’t wait, just keep reading on as we see a detailed step-by-step guide on how to download and flash the I9300XXUGMJ9 Android 4.3 Update on the Galaxy S3.
And FYI, Samsung never brought the Android 4.2 version to Galaxy S3, to it’s one first of its kind huge update for the Galaxy S3 users, whose device came pre-installed with Android 4.1, never saw Android 4.2, and is in the front line to get Android 4.3.About the KNOX on Galaxy S3
KNOX, in plain words is, bad. It will void your warranty upon detecting a not-Samsung-approved change to core files of you phones, which is exactly what is done while rooting a device. So, KNOX hates root, and thus, we hate KNOX.
Because, rooting on a phone with KNOX installed, voids the warranty of the device. Upon first boot after root, KNOX gets triggered on reading the unauthorized code and marks warranty as 0x1, which means void. And, Warranty 0x0 is what is by default and also what you want.
Now, KNOX isn’t present in this text build of Android 4.3 update for the Galaxy S3, which is great — you have one good Android 4.3 based firmware from Samsung without KNOX! But, we fully expect Samsung to mix KNOX in final builds of Android 4.3 for the Galaxy S3.
That said and learned, let’s see how to install Android 4.3 on Galaxy S3 using the leaked firmware, I9300XXUGMJ9.
Warranty may be void of your device if you follow the procedures given on this page!
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-I9300!
Please know that this page is meant only for Samsung Galaxy S3 international variant, model no. GT-I9300!. Please DO NOT try the procedures given here on other variants of the Galaxy S3, including those S3 sets at AT&T, Verizon, T-Mobile, Sprint and other variants who have different model no.BEFORE YOU BEGIN..
You must do this pre-installation stuff before attempting to install this KNOX-free Android 4.3 update on your Galaxy S3 GT-I9300 in order to avoid any complications later, and have a smooth and successful process.BACK UP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on sd card, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPSINSTALL GALAXY S3 DRIVER
You must have proper and working driver installed on your windows computer to be able to successfully flash KNOX-free Android 4.3 firmware international Samsung Galaxy S3 GT-I9300. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy S3 on your computer.
► SAMSUNG GALAXY S3 DRIVER INSTALLATION GUIDECHARGE YOUR DEVICES
If your android device, or PC, powers off due to lack of battery while the process is underway, it could damage the device. So, make sure both of them are adequately charged and that no power interruption takes place when the process is undergoing — at least 50% battery of the device and laptop is what we would recommend.OTHER THINGS TO TAKE CARE OF:
└ Use original USB cable to connect your phone to PC.
└ Do not use the procedures given below on Mac (using VMWare) as it works best on proper Windows PC only.EXAMPLE VIDEO
If you haven’t used Odin software to install a firmware on your device before, we suggest you first watch a video of that, given right below, to get familiar with the process.
Btw, the video below features installation of TWRP recovery on Galaxy S3 using odin. But as the process is exactly same, it doesn’t matter.
NOTE: Keep in mind that the following procedure will flash just a KNOX-disabled firmware. And it is NOT rooted.
Make sure you’ve backed up you’re device before proceeding.DOWNLOADS
Download the files given below and save them in a separate folder on your computer (just to keep things tidy, that is).STEP-BY-STEP GUIDE
Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after installing the firmware, which might delete internal sd card too, your files will remain safe on PC.
Extract/Unzip the chúng tôi file on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe
Extract/Unzip I9300XXUGMJ9_I9300VFGGMJ5_I9300BUUGMJ3_VFG.zip file on your computer now to get these files:
Disconnect the Galaxy S3 from PC if it is connected.
Boot your Galaxy S3 GT-I9300 into Download Mode (the image below of the Galaxy Note 2 would help):
Power off your phone first and wait for 6-7 seconds after display is off.
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.
Also, try another USB port on your PC and make sure you use good quality cable, preferably that came with the phone. Reboot phone and PC and try again
Load the file sinto Odin now:
If you see FAIL message instead of the PASS in Odin’s top left box, that a problem. Try this now: disconnect your S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your S3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Congratulations! You have successfully flashed the KNOX-disabled firmware on your S3.Feedback Us!
It was easy, right? Let us know what you plan to do now, with root access gained.
Suggestions are most welcomed!
The Galaxy S I9000, sidelined by Samsung citing its hardware limitations as the reason for not upgrading it to the latest version of Android, is sure getting a fair amount of AOSP Ice Cream Sandwich (ICS) Android 4.0 ROMs and ports, thanks to the active community on XDA-Developers.
Codename Android is another ICS port for the Galaxy S, based on the Codename Android project for the Google Nexus phones which brings you speed, usability and lots of customization options while ensuring you get the performance of the stock Android ROMs as found on Google’s Nexus devices.
The ROM is good enough for daily use but is still in beta stage, as the Codename Android project itself is under development, so bugs are to be expected. Read on to find out how to flash this ROM on to your Galaxy S I9000.
The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know exactly what you are doing. If any damage occurs to you or your device, including a bricked, non-functional device, we won’t be held liable. You have been forewarned!!!
This ROM and the guide below is compatible only and only with the Galaxy S, model number I9000. It’s not compatible with any other device and may render an incompatible device unusable. Check your device model in Settings » About phone.
Developer → DaxIΠFIΠITY
When booted up, Airplane Mode is on
Can’t change 2G/3G Connection (not even using *#*#4636#*#*)
Signals are not shown properly
Sufficiently charged battery, at least 50% is recommended.
How To Install Codename Android ROM on your Galaxy S I9000
Important Note: If you are on CM7, MIUI or any ICS (Android 4) based custom ROM, you can skip steps 2 and 3 below. If unsure of what ROM you are on, follow all the steps.
Remove sim card lock, if you have set it earlier. Go here: Settings » Location and Security » Sim card lock » checkbox should be clear (not selected).
Flash the stock XXJVU firmware by using → this guide.
Root XXJVU to obtain Clockworkmod recovery (CWM) by using → this guide.
Download the latest version of the Codename Android ROM from the original development page to your desktop.
Transfer the downloaded zip file to the root of your internal SD card on your phone (don’t use microSD card).
Turn off your Galaxy S and wait for complete shutdown (wait for vibration and check capacitive button lights).
Then, boot into CWM recovery. To do so, press and hold these 3 buttons together: Volume Up, Home, and the Power button till the screen turns on, then let go of the buttons. You’ll boot into CWM recovery soon enough. In recovery, use Volume keys to scroll up and down and power key to select an option.
Perform a Wipe by selecting “Wipe data / factory reset” → then Select Yes – Wipe data/Factory reset on the next screen to confirm. (This will NOT format or erase your SD card contents)
Now scroll to “Install zip from sdcard” and select it.
Select “Choose zip from sdcard”. Scroll to the file you transferred in Step 5 and select it.
Now confirm installation by selecting “Yes — Install **your_rom_file_name**.zip. The ROM will start installing.
Your phone will reboot into recovery after a few seconds, then continue installing the ROM. However, if it simply reboots into recovery the first time and does nothing, repeat steps 9, 10 and 11.
Arriving as model no. SM-C710(x), the Galaxy C8 has a firmware available for the China region, as the compatible model no. for this firmware is SM-C7100. The ‘0’ (zero) at the end stands for China. That the firmware for Chinese Galaxy C8 is first to hit the web isn’t very surprising, because Samsung has released the earlier handsets in C-series as an exclusive to China for first few months.
We expect the firmware for the Galaxy C8 meant for Europe and Asia — model no. SM-C710F — to arrive soon too, as this model has been appearing in the rumor pipeline a lot too.
We have the Galaxy C8 firmware available for you to download below, but be sure to check this page again for all software update news on Galaxy C8, along with the fast download link and changelog for each and every major software update.
Android 7.1.1 comes pre-installed on the Galaxy C8, but an update to Android 8.0 Oreo OS is one the cards for sure too. Even though Samsung is yet to make it official, we are sure we would see the Oreo update for Galaxy C8 sometime in Q2 2023.
Here’s a list of all devices with expected release date on which Oreo is expected.
‘When will my device get Android Oreo update‘
Samsung’s C series is applauded for many reasons, and one of them is premium build quality and pretty decent spec-sheet that is on offer. Now, with the Galaxy C8, that is possibly set for release on September 7, you also have the dual-camera apart from the solid spec-sheet and build quality to go for.
Android also enjoys a solid custom ROM development community, thanks to which many Android devices of old times are alive again, up and running the latest OS, Android 8.0. Big thanks for that goes to LineageOS 15 ROM, which is based on Android 8.0 and is now available for devices like OnePlus 2, Redmi 3S, Redmi 2, Moto G3, Nexus 4, Nexus 6, etc. Isn’t that amazing? BTW, check out our LineageOS 15 device list page here, which lists all Android phones and tablets we expect the Android 8.0 LineageOS 15 ROM to arrive on.
Because the LineageOS ROM (version 14.1) was of late released for the Galaxy C9 Pro too, we think there is a good chance that Galaxy C8 would see a LineageOS 15 ROM of its own too. And if that happens, it might get the Android 8.0 update unofficially via the custom ROM even before Samsung prepares one.
Read: Galaxy J5 Oreo update news and expected release date
Galaxy C8 Model Launch OS Current OS Oreo update
China SM-C7100 Android 7.1.1 Android 7.1.1 (Q2 2023)
Europe/Asia SM-C710F Android 7.1.1 Android 7.1.1 (Q2 2023)
We are expecting Samsung to release the Galaxy C8 Oreo update OTA by Q2 2023. However, before that happens, we expect Samsung to release monthly security patches for the Galaxy C8, which shall bring the latest fixes for security issues.
International Galaxy C8 (SM-C710F/G/H/i)
Android 8.0: Release expected in Q2 2023
Firmware and software version not available at the moment.
Galaxy C8 China model (SM-C7100)
Android 8.0: Release expected in Q2 2023
Date Firmware Download Android OS Changelog
05 Sep 2023 C7100ZCU1AQHA Android 7.1.1 Initial release with August 2023 security patch
‘Samsung Galaxy S8 Oreo update news and expected release date‘
Galaxy C8 firmware download
Well, check out the model no. of your Galaxy C8 first, and then download the latest firmware available in the table above for your exact model no. Next, install the downloaded firmware using our Odin Samsung firmware installation guide here.
A new Ice Cream Sandwich Android 4.0.3 firmware for the Galaxy Note — DXLP9 — is rolling out officially. Ice Cream Sandwich for the Galaxy Note brings a premium suite of applications specifically designed for use with the S-Pen, along with general Android 4.0 updates like faster performance, Face Unlock, improved data usage management, and more.
DXLP9 is a firmware for Asian countries like Thailand, Malaysia, Indonesia and Vietnam, but will work on any Galaxy Note out there regardless of country. Being the latest firmware to be released, you should definitely try it out.
Let’s look at the procedure to install the DXLP9 firmware on the Galaxy Note.
This firmware and the guide below are compatible only and only with Galaxy Note, model number N7000. It’s not compatible with any other device. Check your device’s model number in: Settings » About phone.
The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.
How to Install DXLP9 Android 4.0 Firmware on Galaxy Note
Warning! The recent Ice Cream Sandwich firmware, XXLPY, for the Galaxy Note N7000 had a serious bug. From what we can gather, the bug bricks the phone when you wipe data — that is, do a factory reset — in recovery, or flash a ROM or something in recovery after flashing the firmware. So, DO NOT use RECOVERY at all. Even transferring a large file may brick the phone, because it’s related to eMMC (sdcard). It’s said that the bug hasn’t affected all phones, and the brick rate might be 5%, which is actually pretty damn high for bug that can completely destroy the phone, we don’t even know whether Samsung service center guys would be able to fully repair it, although we think they should be able to.
Read more about the bug here.
——————Installation Guide below, but do Read the Warning text above first————–—
Important! Don’t forget to at least make a backup of your APN settings, which you can restore later if your data connection does not work after installing the ROM. Use the backup guide to find out how.
Extract the downloaded zip file once to get the following files (you might see the file name end with .tar instead of .md5 as the file extension is usually hidden, so it’s normal):
SS_DL.dll [ignore this one]
Extract the contents of the Odin 1.85.zip file to a convenient location on your computer.
Disconnect your phone if it’s connected to PC, then switch it off.
In recovery, use the Volume buttons to navigate and the home/power button to select.
Select wipe data/factory reset, then select Yes on next screen to confirm. Wait a while till the data wipe is complete.
After the data wipe is complete, remove the battery of the phone, then re-insert it. Keep the phone off, and go to the next step.
Now, put the Galaxy Note in Download Mode — press and hold these keys together: Volume Down + Home + Power. A Warning! screen will come up; press Volume Up key to continue to enter Download Mode.
Important! Do not make any other changes in Odin except selecting the required file as given in step 13. Leave all other options as they are.
If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed (check step 2). Also, uninstall Kies from the Control Panel as well (this will leave the drivers on the computer but remove Kies which can interfere with the procedure).
IMPORTANT Note: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 9.
If you run into any roadblocks while flashing the firmware, let us know and we’ll help you out.
Samsung Galaxy A5 Active Firmware
Galaxy A5 Active Firmware (SM-G870A, AT&T)
Galaxy A5 Active Firmware (SM-G870F)
Galaxy A5 Active Firmware (SM-G870W, Canada)
How to download correct firmware file
This is the important part!
Be sure to check and find the correct the model no. of your Galaxy A5 Active. Then based on your device’s model no., look for the appropriate firmware build from above.
Now that you know the model no., download the latest firmware from above for that model no. exactly.
Next, install the firmware on your Galaxy A5 Active by following the guide linked right below.
How to Install Firmware
First, read our disclaimer, then take backup and then follow the guide below to install the firmware.
Disclaimer: Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and thus you need to be cautious of it. In any case, you only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Backup, backup, backup! Create an appropriate backup of contacts, pictures, videos, songs and other important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have a backup of all your important files. Sometimes, firmware installation may delete everything on your device! Like, when you change the CSC of your device, knowingly or not.
Step-by-step Firmware Installation Guide
Let’s see how to install the firmware on your Galaxy A5 Active. Make sure you have more than 30% battery on your device.
Step 1. Make sure you have downloaded the correct firmware file on your PC. See above for how to download correct firmware file for your Galaxy A5 Active and download links.
Step 3. Also, download Odin PC software (latest version).
Step 5. Extract the Odin file. You should get the Odin exe file (other files could be hidden, hence not visible).
Step 6. Disconnect your Galaxy A5 Active from PC if it is connected.
Step 7. Boot into download mode:
Power off your device. Wait for 6-7 seconds after screen goes off.
Press and hold the three buttons Volume down + Home + Power together until you see Warning screen.
Press Volume Up to continue to download mode.
Step 9. Connect your device now using USB cable. Odin should recognize your device. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.
You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem (look at step 2 above).
You can try different USB ports on your PC too.
Load the firmware files(s) on your device. This depends on how many files you got in step 4 above upon extracting the firmware .zip file.
Case 1: If you got a single .tar/.tar.md5 file, then load this into AP tab of your Odin software. Then go to next step.
Case 2: If you got more than one .tar/.tar.md5 file, then you must be having files starting with AP, CSC, Home_CSC, BL, CP, etc. stuff. In this case, choose the files as following. Select the firmware files as follows.
About CSC file: Using the HOME_CSC file won’t reset your device, and data on the phone shouldn’t be deleted. However, when we select regular CSC file, and it results in CSC on device being different than that in CSC file, your phone will be formatted automatically. You can even choose to ignore loading the CSC file, that may do alright too. But if it doesn’t works out, repeat the whole process and select CSC file this time around.
Info: When you load files, Odin checks the md5 of firmware file, which takes time. So, simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size will also show up in Odin.
Go back to Log tab now, as it will show the progress of firmware installation when you hit start button in next step.
Wait till installation is finished, after which your device will reboot automatically. You’ll get PASS message as shown below upon successful installation from Odin.
Some errors you may run into, and with respective solution.
If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the file and flash it again as said above.
If you get FAIL in the top left box, then also you need to flash the file again as stated just above.
That’s it. Let device restart automatically.
You can use the firmware for variety of purposes, which includes:
Fix your Galaxy A5 Active if it’s giving you force closes errors and restarts randomly.
Unbrick your Galaxy A5 Active if it’s bootlooping and stuck at logo when restarting.
Go Back to Stock on your Galaxy A5 Active — helps when looking to sell the device, or fix installing OTA updates if broken.
Restore Galaxy A5 Active to factory state.
Upgrade your Galaxy A5 Active to newer Android version.
Downgrade your Galaxy A5 Active to lower build no. at same Android version.
Unroot your Galaxy A5 Active.
Remove custom recovery like TWRP and CWM, if installed, on your Galaxy A5 Active.
Update the detailed information about Update Galaxy S2 With Leaked Xxkpa Android 4.0 Firmware on the Moimoishop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!